Mean Well HLG-60H-42 Manual de Usario

Lee a continuación 📖 el manual en español para Mean Well HLG-60H-42 (7 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
Installaon Manual
Type
LED Power Supply
Families
AP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD,
PLC, PLD, PLM, PLN, PLP, PWM, ULP
Introducon
The LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an
adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of
them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.
Mean Well’s LED power supplies include metal case, plasc case, and PCB types.
Installaon
( )1 Before commencing any installaon or maintenance work, please disconnect the power supply from the ulity.
Ensure that it cannot be re-connected inadvertently!
( )2 Keep proper venlaon around the unit and do not stack any object on it. Also a 10-15 cm clearance must be
kept when the adjacent device is a heat source.
( )3 Mounng orientaons other than standard orientaon or operate under high ambient temperature may
increase the internal component temperature and will require a de-rang in output current. Please refer to
the specicaon sheet to receive the opmum mounng posion and informaon about the -rang curve. de
( )4 Current rang of an approved primary /secondary cable should be greater than or equal to that of the unit.
Please refer to its specicaon.
( )5 For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighng
xture is ght so that water cannot intrude into the system.
( )6 For dimmable LED power supplies, make sure that your dimming controller is capable of driving
these units. For ELN series, either “D” or “Ptype, require 40mA each unit; for those with “3 in 1” dimming
funcon, e.g. HLG and LPF series, require 0.15mA each unit.
( )7 Wiring: The wire color will vary by country, please refer to the table below.
North America
European Harmonized
Live and ACL
Black
Brown
Neutral and ACN
white
Blue
PE and FG (Class I only)
Green
Green/yellow
( )a Connect the FG wire (green or green/yellow) of the LED power supply to (green or green/yellow), this PE
step can be skipped when the unit is marked class II, ungrounded.
( )b Connect the ACL wire (black or brown) of the LED power supply to Live (black or brown).
( )c Connect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).
Installaon Manual
( )8 The maximum number of the LED PSUs that can be connected to a circuit breaker at 230V is shown as below.
Model
B10
B16
C10
C16
D10
D16
APC-8
17
18
29
37
59
APC- 12
17
18
29
37
59
APC- 16
13
14
23
28
46
APC- 25
9
9
15
18
30
APC- 35
5
6
9
12
19
APC- 8E
17
18
29
37
59
APC- 12E
17
18
29
37
59
APC- 16E
13
14
23
26
42
APV-8
17
18
29
37
59
APV- 12
17
18
29
37
59
APV- 16
13
14
22
28
44
APV- 25
9
9
15
18
30
APV- 35
6
6
10
13
21
APV- 8E
17
18
29
37
59
A -12E PV
17
18
29
37
59
APV-16E
13
14
22
28
44
CEN- 60
32
20
32
20
32
CEN- 75
25
16
25
16
25
CEN-100
19
11
19
11
19
CLG- 60
32
20
32
20
32
CLG- 100
3
3
5
6
10
CLG- 150
3
3
5
6
10
ELG- 75
7
7
11
14
23
ELG- 100
3
4
6
8
12
ELG- 150
3
3
5
6
11
ELG- -C 75
7
7
11
14
23
ELG- -C 100
3
4
6
8
12
ELG- -C 150
3
4
6
8
13
ELN- 30
4
5
8
10
16
ELN- 60
3
3
5
7
11
GSC18
42
26
42
26
42
GSC25
42
26
42
26
42
GSC40
36
22
36
22
36
HBG- 100
4
5
8
10
16
HBG- 160
4
4
7
8
12
HBG- 240
2
2
3
4
7
HBG- 60
28
20
32
20
32
Installaon Manual
Model
B10
B16
C10
C16
D10
D16
HLG- 40H
7
12
13
20
26
41
HLG- 60H
6
9
10
16
20
32
HLG- 80H
2
3
3
6
7
12
HLG- 100H
3
4
5
8
10
16
HLG- 120H
3
5
5
9
10
17
HLG- 150H
2
4
4
7
8
13
HLG- 185H
2
4
4
7
6
11
HLG- 240H
1
2
3
4
5
8
HLG- 320H
1
1
1
2
3
5
HLG- 600H
1
1
1
2
2
3
HLG- -C 60H
5
8
8
13
16
26
HLG- -C 80H
3
4
5
8
10
16
HLG- -C 120H
2
4
4
6
8
13
HLG- -C 185H
1
2
2
3
4
7
HLG- -C 240H
1
2
2
3
4
7
HLG- -C 320H
0
1
1
2
3
5
HLN- 40H
7
12
13
20
26
41
HLN- 60H
6
9
10
16
20
32
HLN- 80H
2
3
3
6
7
12
HLP- 40H
7
12
13
20
26
41
HLP- 60H
6
9
10
16
20
32
HLP- 80H
2
3
3
5
6
10
HSG- 70
4
6
7
11
14
22
HVG-65 (480V)
7
12
12
20
25
40
HVG-100 (480V)
3
5
5
8
10
17
HVG-150 (480V)
2
4
4
6
8
13
HVG-240 (480V)
2
4
4
7
9
15
HVG-320 (480V)
1
2
2
4
5
8
HVGC-65 (480V)
7
12
12
20
25
40
HVGC-100 (480V)
3
5
5
8
10
17
HVGC-150 (480V)
2
4
4
6
8
13
HVGC-240 (480V)
2
4
4
7
9
15
HVGC-320 (480V)
1
2
2
4
5
8
LCM- 25
16
26
27
44
50
80
LCM- 40
16
26
27
44
29
47
LCM- 60
15
25
20
32
20
32
LCM-25DA
16
26
27
44
50
80
LCM-40DA
16
26
27
44
29
47
LCM-60DA
15
25
20
32
20
32
LPC- 20
5
8
9
14
18
29
LPC- 35
2
4
4
7
9
15

Especificaciones del producto

Marca: Mean Well
Categoría: No categorizado
Modelo: HLG-60H-42
Color del producto: Zwart
Peso.: 24700 g
Ancho: 438 mm
Profundidad: 724 mm
Altura: 88 mm
Peso del embalaje: 38600 g
Indicadores LED: HDD, LAN, Power
Interruptor encendido / apagado: Ja
Puerto(s) VGA (D-Sub): 1
Suministro de red: 2200 W
Certificados de sostenibilidad: RoHS
Tipo de procesador: Nee
Temperatura de almacenamiento: -40 - 60 °C
numero de fans: 4 ventilator(en)
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A: 2
Zócalo del procesador: Socket SP3
Memoria interna máxima: 2000 GB
Modelo de adaptador de gráficos integrado: Aspeed AST2500
Humedad de almacenamiento: 5 - 95 procent
Tipo de vivienda: Rack (2U)
Certificación 80 PLUS: 80 PLUS Titanium
Fuente de alimentación redundante: Ja
ETC: Ja
Factor de forma de memoria: 288-pin DIMM
placa base con chipset: Intel SoC
Ranuras PCI Express x16 (Gen. 3.x): 2
Interfaces de unidad de almacenamiento compatibles: SATA III
voltaje de la memoria: 1.2 V
Procesadores compatibles: AMD EPYC
Número de procesadores admitidos: 2
Memoria UDIMM máxima: 2000 GB
Número de ranuras DIMM: 16
Admite velocidades de reloj RDIMM: 2666 MHz
Compatible con capacidades del módulo DIMM: 8GB, 16GB, 32GB, 64GB, 128MB
Número de unidades de almacenamiento admitidas: 6
Tamaños de unidades de almacenamiento admitidos: 2.5 "
Tipos de memoria soportados: DDR4-SDRAM
Bahías HDD de intercambio en caliente: Ja
voltaje-de-entrada-de-CA: 100 - 240 V
Frecuencia-de-entrada-de-CA: 50 - 60 Hz
Temperatura de funcionamiento (TT): 10 - 30 °C
Humedad relativa de funcionamiento (VV): 8 - 90 procent
Número de fuentes de alimentación redundantes instaladas: 1
Diámetro del ventilador: 80 mm
tipo de BIOS: AMI
Tamaño de la memoria del BIOS: 128 Mbit
Número de ranuras M.2 (M): 1
Baño de salida DC (+ 12 V): 183.33 A
Compatibilidad con la interfaz de gestión de plataforma inteligente (IPMI): Ja
BMC integrado con IPMI: Ja
Dimensiones de la fuente de alimentación (AnxPrxAl): 45 x 480 x 40 mm

¿Necesitas ayuda?

Si necesitas ayuda con Mean Well HLG-60H-42 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Mean Well Manuales

No categorizado Manuales

Últimos No categorizado Manuales