Mean Well IRM-30-12 Manual de Usario

Mean Well No categorizado IRM-30-12

Lee a continuación 📖 el manual en español para Mean Well IRM-30-12 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Installaon Manual

 Type：

：

：：Open Frame (PCB) Type Switching Power Supply

(Families: PM, NFM, IRM, MPS, MPD, MPT, MPQ, RPS, RPD, RPT, PS, PD, PT, PQ, PPS, PPT, PPQ, ASP, PID,

LPS, LPP, EPS, ELP, EPP)

 Introducon

An open frame (PCB) type switching power supply is a power supply designed to be integrated or installed into a

system enclosure. Mean Well’s open frame (PCB) type power supplies include on board, general PCB, green PCB,

and medical PCB types .

 Installaon

（）1Before commencing any installation or maintenance work, please disconnect your system from the

ulity. Ensure that it cannot be re-connected inadvertently!

（）2At least 5mm insulaon distance on the boom of the unit should be kept and a Mylar lm should be

added between the unit and the system. In addion, enough insulation distance, for keep 10mm

general type/15mm for medical type, around the unit.

（）3Power supplies greater than 120W may require a forced air/fan for cooling. Please refer to

specicaons to receive a minimum air intensity and air-ow direcon.

（）4Allow good venlaon for the unit in use to prevent it from overheang. Also, a 10-15 cm clearance

must be kept when the adjacent device is a heat source.

（）5Mounng orientaons other than standard orientaon or operate under high ambient temperature

may increase the internal component temperature and will require a de-rang in output current.

Please refer to the specicaon sheets to receive the opmum mounng posion and informaon

about the -rang curve.de

（）6Recommended wires are shown as below.

AWG

Rated Current of

Equipment (Amp)

6-10A

10- 16A

16 25A-

25 32A-

32 40A-

Cross-secon of

Lead(mm2 )

0.75

1.00

1.5

2.5

Note:Current each wire carries should be de-rated to 80% of the current

suggested above when using 5 or more wires connected to the unit.

（）7 For other informaon about the products, please refer to www.meanwell.com for details.

 Warning / Cauon !!

（）1Risk of electrical shock and energy hazard. All should be examined by a qualied technicianfailure .

Please do not try to x the power supply by yourself!

（）2Please do not install power supplies in places with high moisture or near the water.

（）3Please do not install power supplies in places with high ambient temperature or near re source.

Please refer to the specicaons about the maximum ambient temperature limitaons.

（）4Output current and output waage must not exceed the rated values on specicaons.

（）5The ground (FG) must be connected to earth ground.

（）6All MW’s PSUs are designed in accordance with EMC regulaons and the related test reports are

available by request. Since they are belong to component power supplies and will be installed inside

system enclosure, when they are integrated into a system, the EMC characteriscs of the end

system must be re-veried again.

Installaon Manual

Manufacturer：

：

：：

MEAN WELL ENTERPRISES Co., L .TD

No.28, Wuquan 3rd R , Wugu Dist., d.

New Taipei City 24891, Taiwan

Tel: +886-2-2299-6100

Web: www.meanwell.com

Branch Oce：

：

：：

China

MEAN WELL (GUANGZHOU)

ENTERPRISES Co., LTD.

2F, A Building, Yuean lndustry Park,

Huangcun,Dongpu Yown, Tianhe

District, Gungzhou, China

Post Code:510660

Tel: +86-20-2 -1200 887

Web: www.meanwell.com.cn

U.S.A.

MEAN WELL USA, INC.

44030 Fremont Blvd., Fremont,

CA 94538, U.S.A.

Tel: +1-510- -8886 683

Web: www.meanwellusa.com

Europe

MEAN WELL EUROPE B.V.

Langs de Werf 8, 1185XT

Amstelveen, The Netherlands

Tel: + - - -6000 31 20 758

Web: www.meanwell.eu

Especificaciones del producto

Marca:	Mean Well
Categoría:	No categorizado
Modelo:	IRM-30-12
Peso.:	1000 g
Fuente de alimentación:	AC 110/230 V ( 50/60 Hz )
Frecuencia del procesador:	80 MHz
Modelo de procesador:	NXP MPC859DSL
Tecnología de conectividad:	Bedraad
Tipo de procesador:	Ja
Estándar de red:	IEEE 802.1p, IEEE 802.1Q
Algoritmos de seguridad compatibles:	DES
Conexiones:	4 x 10/100 (Annex A) \n1 x RJ-11 ADSL (over POTS)
Funciones de red:	L2TP, IPSec, PPPoE, PPPoA
Memoria flash:	8 MB
Velocidad de datos ascendentes:	0.8 Mbit/s
Velocidad de datos descendentes:	8 Mbit/s
Requerimientos mínimos del sistema:	ADSL service from your local broadband service provider\nOptional ADSL POTS splitters or ADSL line filters may be required by your service provider. Please contact your service provider directly for details
Máx. ratio de transferencia:	0.1 Gbit/s
Dimensiones (Ancho x Fondo x Alto):	300 x 180 x 45 mm
Cantidad de túneles VPN:	100
Protocolos de gestión:	SNMP 1, SNMP 2, Telnet, SNMP 3
Consumo de energía (típico):	12 W
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	5 - 90 procent
Protocolos de enlace de datos:	Ethernet, Fast Ethernet
Propiedades de VPN:	L2TP, IPSec, GRE
Protocolos de enrutamiento:	OSPF, RIP-1, RIP-2
Protocolo de señal digital:	ADSL over POTS
Método de autentificación:	RADIUS, SSH, PAP, CHAP
Conexión RDSI:	Nee
ADSL:	Ja