Mean Well RPSG-160-24 Manual de Usario

Lee a continuación 📖 el manual en español para Mean Well RPSG-160-24 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Installation Manual
Type
Medical Switching Power Supply
(1) Enclosed (Families: MSP)
(2) Modular (Families: MP, NMP)
(3) PCB (Families: MPS, MPD, MPT, MQ, RPS, RPD, RPT, RPTG, NEM, PM)
(4) Adaptor (Families: GSM, MES)
Installation
(1) Enclosed Type
(a) Before any installation or maintenance work, please disconnect your system from the utility.
Ensure that it cannot be re-connected inadvertently!
(b) Mounting orientations other than standard orientation or operate under high ambient
temperature may increase the internal component temperature and will require a de-rating in
output current. Please refer to the specification sheets to receive the optimum mounting
position and information about the de-rating curve.
(c) Fans or ventilation holes must be kept free from any obstructions. Also a 10-15 cm clearance
must be kept when the adjacent device is a heat source.
(d) Keep enough insulation distance between mounting screws and internal components of
Enclosed units. Please refer to case drawing on specifications to receive the maximum length of
mounting screw.
(e) Recommended wires of Enclosed units are shown as below.
AWG 18 16 14 12 10 8
Rated Current of
Equipment (Amp) 6A 6-10A 10-16A 16-25A 25-32A 32-40A
Cross-section of
Lead(mm2 ) 0.75 1.00 1.5 2.5 4 6
Note: The suggested maximum current above only suit for 1-4 strips, 5 or more
strips should not exceed 80% of current rating.
Make sure that all strands of each stranded wire enter the terminal connection and the screw
terminals are securely fixed to prevent poor contact.
(f) For other information about the products, please refer to www.meanwell.com for details.
(2) Modular Type
(a) Before any installation or maintenance work, please disconnect your system from the utility.
Ensure that it cannot be re-connected inadvertently!
(b) Mounting orientations other than standard orientation or operate under high ambient
temperature may increase the internal component temperature and will require a de-rating in
output current. Please refer to the specification sheets to receive the optimum mounting
position and information about the de-rating curve.
(c) Fans or ventilation holes must be kept free from any obstructions. Also a 10-15 cm clearance
must be kept when the adjacent device is a heat source.
(d) Keep enough insulation distance between mounting screws and internal components of
Modular units. Please refer to case drawing on specifications to receive the maximum length of
mounting screw.
(e) Recommended wires of Modular units are shown as below.
AWG 18 16 14 12 10 8
Rated Current of
Equipment (Amp) 6A 6-10A 10-16A 16-25A 25-32A 32-40A
Cross-section of
Lead(mm2 ) 0.75 1.00 1.5 2.5 4 6
Note: The suggested maximum current above only suit for 1-4 strips, 5 or more
strips should not exceed 80% of current rating.
Make sure that all strands of each stranded wire enter the terminal connection and the screw
terminals are securely fixed to prevent poor contact.
(f) For other information about the products, please refer to www.meanwell.com for details.
Installation Manual
(3) PCB Type
(a) Before any installation or maintenance work, please disconnect your system from the utility.
Ensure that it cannot be re-connected inadvertently!
(b) Mounting orientations other than standard orientation or operate under high ambient
temperature may increase the internal component temperature and will require a de-rating in
output current. Please refer to the specification sheets to receive the optimum mounting
position and information about the de-rating curve.
(c) Fans or ventilation holes must be kept free from any obstructions. Also a 10-15 cm clearance
must be kept when the adjacent device is a heat source.
(d) Recommended wires of PCB units are shown as below.
AWG 18 16 14 12 10 8
Rated Current of
Equipment (Amp) 6A 6-10A 10-16A 16-25A 25-32A 32-40A
Cross-section of
Lead(mm2 ) 0.75 1.00 1.5 2.5 4 6
Note: The suggested maximum current above only suit for 1-4 strips, 5 or more
strips should not exceed 80% of current rating.
Make sure that all strands of each stranded wire enter the terminal connection and the screw
terminals are securely fixed to prevent poor contact.
(e) At least 5mm insulation distance on the bottom of PCB units should be kept and a Mylar film
should be added between the units and the system. In addition, keep enough insulation
distance of 15mm around the PCB units.
(f) PCB units greater than 120W may require a forced air/fan for cooling. Please refer to
specifications to receive a minimum air intensity and air-flow direction.
(g) For other information about the products, please refer to www.meanwell.com for details.
(4) Adapter Type
(a) Before any installation or maintenance work, please disconnect your system from the utility.
Ensure that it cannot be re-connected inadvertently!
(b) Mounting orientations other than standard orientation or operate under high ambient
temperature may increase the internal component temperature and will require a de-rating in
output current. Please refer to the specification sheets to receive the optimum mounting
position and information about the de-rating curve.
(c) Fans or ventilation holes must be kept free from any obstructions. Also a 10-15 cm clearance
must be kept when the adjacent device is a heat source.
(d) Before attaching the DC plug of an adaptor to equipment, please unplug the adaptor from the
AC power and verify the unit is within the voltage and current rating on the equipment.
(e) Keep the linkage between the adaptor and its power cord tightly as well as connecting the DC
plug to equipment properly.
(f) Protect the power cord of adaptors from being trodden on or being squashed.
(g) An approved power cord of an adaptor should greater or equal to SVT, 3G×18AWG or H03VV-F,
3G×0.75mm2.
(h) If the final equipment is not used for long period of time, disconnect the equipment from
adaptors to avoid being damaged by voltage peaks or lightning strike.
(i) For other information about the products, please refer to www.meanwell.com for details.
User Manual
NMP series:
http://www.meanwell.com/webapp/product/search.aspx?prod=NMP1K2&pdf=Tk1QLUUucGRm&a=4
Installation Manual
Warning / Caution !!
(1) Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician.
Please do not remove the case of the power supply by yourself! Please do not install the units in
places with high moisture or near the water.
(2) Please do not install the units in places with high ambient temperature or near fire source. The
maximum ambient temperature, please refer to their specifications.
(3) Output current and output wattage must not exceed the rated values on specifications.
(4) To avoid risk of electric shock, for class I products, the ground (FG) must be connected to protective
earth.
(5) The Enclosed, Modular and PCB units are designed in accordance with EMC regulations and the
related test reports are available by request. Since they are belong to component power supplies
and will be installed inside system enclosure, when they are integrated into a system, the EMC
characteristics of the end system must be re-verified again.
Manufacturer
MEAN WELL ENTERPRISES Co., LTD.
No.28, Wuquan 3rd Rd., Wugu Dist.,
New Taipei City 24891, Taiwan
Tel: +886-2-2299-6100
Web: www.meanwell.com
Branch Office
China
MEAN WELL (GUANGZHOU)
ENTERPRISES Co., LTD.
2F, A Building, Yuean lndustry Park,
Huangcun,Dongpu Yown, Tianhe
District, Gungzhou, China
Post Code:510660
Tel: +86-20-2887-1200
Web: www.meanwell.com.cn
U.S.A.
MEAN WELL USA, INC.
44030 Fremont Blvd., Fremont,
CA 94538, U.S.A.
Tel: +1-510-683-8886
Web: www.meanwellusa.com
Europe
MEAN WELL EUROPE B.V.
Langs de Werf 8, 1185XT
Amstelveen, The Netherlands
Tel: +31-20-758-6000
Web: www.meanwell.eu

Especificaciones del producto

Marca: Mean Well
Categoría: No categorizado
Modelo: RPSG-160-24
Color del producto: Zwart
Peso del embalaje: 10200 g
Ancho del embalaje: 820 mm
Empaquetadura en profundidad: 160 mm
Altura del embalaje: 500 mm
Ajustable en altura: Ja
Diagonal de la pantalla: 27 "
Resolución: 1920 x 1080 Pixels
Pantalla táctil: Nee
Densidad de pixeles: 82 ppi
Relación de aspecto original: 16:9
red LAN: Nee
Ángulo de visión, horizontal: 178 °
Ángulo de visión, vertical: 178 °
Cables suministrados: AC, DisplayPort
Nombre del color: Raven Black
Forma de pantalla: Flat
Relación de contraste típica: 1000:1
Posicionamiento en el mercado: Gamen
Número de puertos HDMI: 2
Opción de montaje de bloqueo de cable: Ja
Tipo de ranura para candado de cable: Kensington
Altavoces incorporados: Ja
Energía promedio: 6 W
Consumo de energía (en espera): - W
Consumo de energía (máx.): 46 W
Número de hablantes: 2
Control del volumen: Ja
Certificación: RoHS, EU Energy Efficiency Level (Level-E)\nEyesafe Display 2.0, TÜV Low Blue Light (Hardware solution), TÜV Rheinland Eye Comfort
Pantalla, número de colores.: 16,7 miljoen kleuren
Consumo de energía (cuando está apagado): 0.5 W
Velocidad máxima de actualización: 180 Hz
Tecnología de alto rango dinámico (HDR): DisplayHDR 400
Soporte HDR: Ja
tipo HD: Full HD
Micrófono incorporado: Nee
Salida de audio: Ja
hdmi: Ja
Versión HDMI: 2.1
Tecnología de visualización: LED
Tiempo de respuesta: 4 ms
Tamaño de píxel: 0.311 x 0.311 mm
Montaje VESA: Ja
Interfaz de montaje en panel: 100 x 100 mm
Ancho del bisel (abajo): 22 mm
Ancho del bisel (lateral): 2 mm
Ancho del bisel (arriba): 2 mm
Brillo (típico): 350 cd/m²
espacio de color rgb: DCI-P3
Relación de contraste (dinámica): 3000000:1
Cámara integrada: Nee
Profundidad (sin base): 58.5 mm
Altura (sin base): 367.6 mm
Ancho (sin base): 613.6 mm
Peso (sin base): 4900 g
Número de DisplayPorts: 1
Consumo de energía (HDR) por 1000 horas: - kWu
Consumo de energía (DEG) por 1000 horas: - kWu
Ancho del dispositivo (con soporte): 613.6 mm
Dispositivo de profundidad (con soporte): 258.8 mm
Altura del dispositivo (con soporte): 527.4 mm
Peso (con soporte): 6800 g
AMD FreeSync: Ja
NVIDIA G-SYNC: Nee
Gama de colores: 90 procent
Soporta Windows: Windows 10, Windows 11
Tipo de retroiluminación: W-LED
Tipo de comida: Intern
Tipo de panel: IPS
Giratorio: Ja
Giratorio horizontalmente: -30 - 30 °
Concentrador USB incorporado: Nee
Tamaño de imagen (horizontal): 596.7 mm
Tamaño de imagen (vertical): 335.7 mm
Soporte incluido: Ja
Cobertura sRGB (promedio): 99 procent
Tecnología de baja luz azul: Ja
Versión DisplayPort: 1.4
Bisagra: Ja
Esquina pivotante: -90 - 90 °
Número de tornillos: 4
Tipo AMD FreeSync: FreeSync Premium
Brillo de la pantalla (pico): 400 cd/m²
Wifi.: Nee
voltaje-de-entrada-de-CA: 100 - 240 V
Frecuencia-de-entrada-de-CA: 50/60 Hz
Consumo de energía (típico): 21 W
Rango de ángulo de inclinación: -5 - 22 °
Longitud del cable DisplayPort: 1.8 m
Longitud-del-cable-de-alimentación: 1.5 m
Período de garantía: 3 jaar
ajustes de inclinación: Ja

¿Necesitas ayuda?

Si necesitas ayuda con Mean Well RPSG-160-24 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Mean Well Manuales

No categorizado Manuales

Últimos No categorizado Manuales