Mean Well TS-3000-224B Manual de Usario

Mean Well No categorizado TS-3000-224B

Lee a continuación 📖 el manual en español para Mean Well TS-3000-224B (21 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/21
TN/TS-3000
Inverter Instruction Manual
TN/TS-3000 Inverter Instruction Manual
Index
June. 2020 Version 11
1. Safety Guidelines 1
1
2
3
3
3
6
10
13
15
17
18
13
14
5
3
5
5
6
7
9
10
11
11
13
13
2. Introduction
3. User Interface Panel
4. Explanation of Operating Logic
5.TN/TS-3000 Initial Output Voltage & Frequency and Procedure to
Setting Operating Mod e
6. Protection
7. Installation & Wiring
8. Failure Correction Notes
9. Warranty
2.1 Features
3.3 LED Indicator on Front Panel
3.1 Front Panel
3.2 AC Terminal Configuration
2.2 Main Specification
2.3 System Block Diagram
3.4 Functional Indication and Alarm
3.5 Rear Panel
4.1 Explanation of UPS Mode Control Logic
4.2 Explanation of Energy Saving Mode Control Logic
5.1 Initial Factory State
5.2 Initial Setting for Transition Voltages
5.3 Procedures to Setting Operating Mode, Output Voltage,
5.4 Remote Monitoring Software
5.5 Remote Control Module (Optional Accessory)
Frequency, and Standby Saving Mode
6.1 Input Protection
6.2 Output Protection
...............................................................................
........................................................................................
........................................................................................
........................................................................
..................................................................
............................................................................
....................................................................................
...........................................................
......................................................
................................................
....................................................................................
.....................................................................
...................................................................
.......................................
.......................................................
...........................
...........................................................................................
...........................................................................
........................................................................
..........................................................................
...................................................................
.............................................................................................
........................................
........................................................
....................................
...................
1
1.Safety Guidelines (Please read through this manual before assembling the
inverter)
Risk of electrical shock and energy hazard. All failures should be examined by a
qualified technician. Please do not remove the case of the inverter by yourself!
After connecting the AC input of the inverter to the utility, the AC outlet of the inverter
It is highly recommended to mount the unit horizontally.
Please do not install the inverter in places with high moisture or near water.
Please do not install the inverter in places with high ambient temperature, under
Please only connect batteries with the same brand and model number in one battery
Never allow a spark or flame in the vicinity of the batteries.
Make sure the air flow from the fan is not obstructed at both sides (front and back)
Please do not stack any object on the inverter as it may impede heat dissipation.
bank. Using batteries from different manufacturers or different capacities is strictly
prohibited!
of the inverter. (Please allow at least 15cm of space)
will have AC output even if the power switch on the front panel is in the OFF position.
direct sunlight, or near fire source.
Please do not turn on the inverter before start the engine if inverter connect to
vehicles battery directly.
2.Introduction
The TN/TS-3000 is a true sine wave DC/AC inverter fully digital controlled by an
TN-3000 possesses 2 operating modes, UPS and Energy saving mode. Depending
advanced microprocessor. By using the setting button on the front panel or the
on operating requirement, the user can flexibly reconfigure operating mode to
suit their needs. When the UPS mode is selected, AC utility voltage will automatically
be bypassed to the output load/equipment. If there is an interruption to the AC
monitoring software, the user can flexibly adjust output voltage, frequency, turn
ON or OFF standby saving mode, and operating mode.
Inverter Inverter
Inverter
Inverter
Don't
disassemble
Keep away from
moisture
Keep away from
fire or high
temperature
Don't stack on
the inverter
Keep good
ventilation
WARNING:
It is suggested to execute regular battery maintenance
Batteries will have aging problem after years of operation.
(e.g. every year). Once aged, the batteries should be changed
by professional technician, or the failed batteries may cause
fire or other hazards.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(a) This device may not cause harmful interference, and
(b) this device must accept any interference received, including interference that
may cause undesired operation.

Especificaciones del producto

Marca: Mean Well
Categoría: No categorizado
Modelo: TS-3000-224B

¿Necesitas ayuda?

Si necesitas ayuda con Mean Well TS-3000-224B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Mean Well Manuales

No categorizado Manuales

Últimos No categorizado Manuales