Metra 70-1785 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 70-1785 (3 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
Red - 12 Volts Switched Power
Yellow - 12 Volts Constant Power
Orange/White - Illumination
Gray - Right Front Speaker Positive
White - Left Front Speaker Positive
Green - Left Rear Speaker Positive
Violet - Right Rear Speaker Positive
Gray/Black - Right Front Speaker Negative
White/Black - Left Front Speaker Negative
Green/Black - Left Rear Speaker Negative
Violet/Black - Right Rear Speaker Negative
Receiver Wiring Adaptor
120 70-1785
Revision 05/12/20
*120701785*
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
STEP 1 -- MATCH & CONNECT WIRES
Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your
new receiver may, or may not, match the wire colors of the adaptor. Match adaptor and receiver wires by function, disregarding color.
Individually tape off any unused wires.
Make final wiring connections following instructions on page 3.
A.
B.
C.
Please see the vehicle application chart on
page 2 before making ANY wiring connections.
READ FIRST
Black - Chassis Ground
Copyright 2020 Crutchfield Corporation
White - Left Front Channel
Gray - Right Front Channel
Green - Left Rear Channel
Violet - Right Rear Channel
Blue - Porsche Antenna Turn-On
Blue - Audi (not used)
Blue/White - Audi Amplifier Turn-On
Blue/White - Porsche Amplifier Turn-On
Blue/White - Volkswagen Amplifier Turn-On
Blue - Volkswagen Antenna Turn-On
Functions of the Red
and Yellow wires
are reversed in
Porsche vehicles.
Some vehicles don't
have 12V Switched
Power. See the note
on page 2 for more
details.
Connect to RCA
preamp outputs
of new receiver.
Receiver Wiring Adaptor
120 70-1785
STEP 1 -- MATCH & CONNECT WIRES (continued)
1988-'89 Volkswagen Golf, GTI and Jetta
Connections:
White, White/Black, Gray and Gray/Black wires to the Front speaker wires of the receiver.
Green, Green/Black, Violet and Violet/Black wires to the Rear speaker wires of the receiver.
White and Gray RCAs to the Front RCA outputs of the receiver.
The Green and Violet RCAs are not used.
1988-'92 Audi 80
1988-'95 Audi 90
1989-'94 Audi 100 w/o Bose
1989-'94 Audi 200 w/o Bose
Connections:
White, White/Black, Gray and Gray/Black wires to the Front speaker wires of the receiver.
Green and Violet RCAs to the Rear RCA outputs of the receiver.
Green, Green/Black, Violet and Violet/Black wires are not used. Tape them off individually with electrical tape.
White and Gray RCAs are not used.
1990-'94 Audi V8 Quattro
1989-'94 Audi 100 with Bose
1989-'94 Audi 200 with Bose
Connections:
White and Gray RCAs to the Front RCA outputs of the receiver.
Green and Violet RCAs to the Rear RCA outputs of the receiver.
None of the wires labeled for speakers will be used. Tape them off individually with electrical tape.
1990-'93 Volkswagen Cabriolet and Corrado
1990-'92 Volkswagen Golf, GTI, Jetta and Passat
1993-'95 Porsche 911
Vehicle Applications
Page 2
Copyright 2020 Crutchfield Corporation
Some vehicles don't have 12 Volts Switched
Power in the vehicle. The installer will need
to connect the receiver's switched power
lead to a 12V switched power source in the
fuse box.
List of Vehicles without 12V switched power:
1990 and older Volkswagen Golf, GTI
Early 1992 and older Volkswagen Jetta
1990 Volkswagen Passat
1991 and older Audi 80, 90, 100, 200
All Audi V8
NOTE:
Receiver Wiring Adaptor Connections
120 70-1785
Page 3
STEP 2 -- CONTINUED
A. Strip wires back 1/2”.
B. Twist wires together and
insert in crimp cap.
C. Squeeze middle of cap
for tight connection.
STEP 3 -- APPLICATION
When ready to install the receiver, plug
the Wiring Adaptor from the new receiver
or receiver assembly into the factory
radio harness(es) in the vehicle dash.
D. Complete crimp connections
for all necessary wires.
E. Be sure to wrap any wires from
the Wiring Adaptor that are
not necessary (wires with no
match from the new receiver)
with electrical tape.
STEP 2 -- CRIMP CONNECTIONS
Tools & Parts
Required
Wire Stripper/Crimp Tool Crimp Caps
Unused Wire (tape over bare wires)
Receiver Wiring Adaptor
Generic Illustration
Generic Illustration
Copyright 2020 Crutchfield Corporation

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 70-1785

¿Necesitas ayuda?

Si necesitas ayuda con Metra 70-1785 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales