Metra 82-7403 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 82-7403 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
1. Use two (2) screws to secure speaker adaptor bracket
to a stationary surface that can be used as a backup
for drilling (Figure 1).
2. Choose a hole saw to match the opening size for the
tweeter to be installed. Using the in the center dimple
of the bracket as the center for the hole, cut out
opening for the tweeter (Figure 2).
Note: Depending on the application, some tweeters
can be surface mounted to the adaptor bracket without
drilling.
3. Remove screws and remove bracket from backup
surface.
4. Secure tweeter to adaptor bracket using the method
described and hardware supplied with the tweeter
purchased. Additional drilling may be required.Note:
5. Make connections to vehicle speaker wires and
secure speaker/bracket assembly to location (Figure 3).
Speaker Adaptor Bracket
Tools Required
120 82-7403
Phillips
Screwdriver
Parts
Supplied:
(2) Brackets
Revision 07/13/21
*120827403*
6
It may be necessary to acquire screws to mount the speaker/
bracket assembly to the location.
IMPORTANT
!
Copyright 2021 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
FIGURE 3FIGURE 1
FIGURE 2
Speaker Adaptor Br
Speaker Adaptor Br
Speaker Adaptor Br
Speaker Adaptor Bracket
acket
acket
acketSpeaker Adaptor Bracket
Dimple
Dimple
Dimple
DimpleDimple
Drill &
Hole Saw

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 82-7403

¿Necesitas ayuda?

Si necesitas ayuda con Metra 82-7403 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales