Metra 82-9600 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 82-9600 (16 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 4/14/2014 INST82-9600
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
INSTALLATION INSTRUCTIONS FOR PART 82-9600
• Mounts aftermarket 6” to 6.5” speakers into
factory speaker locations.
A) (2) speaker adaptersB) (6) #8 x 1” Pan-head Phillips screws
KIT FEATURES
KIT COMPONENTS
• Panel removal tool Phillips screwdriver • Socket Wrench (T-25, T-27, 6mm or 3/16 hex)
TOOLS REQUIRED
(FL models with fairings)
A B
Fairing Disassembly
Harley-Davidson FLH, batwing fairing
... 1998-2013 .......................................................2-3
Harley-Davidson Roadglide, sharknose fairing
... 1998-2013 .......................................................4-5
Kit Assembly .......................................................... 6
82-9600
Fairing Disassembly
FLH/Batwing models:
1. Cover the front fender.
2. Remove (2) T-27 Torx bolts from inner
fairing (under mirrors) (Figure A, step 2)
3. Remove (2) T-27 Torx bolts from outer
edges of inner fairing near the fork tubes
(facing forward) (Figure A, step 3)
4. Remove (3) T-27 Torx bolts from bottom
edge of windshield. (Figure A, step 4)
NOTE: Windshield and fairing
will be loose once these screws
are removed. Use extreme
caution not to damage fairing or
windshield.
5. Remove windshield taking caution that
the outer fairing is loose.
Continued on next page
(Figure A)
Step 2 Step 2
Step 3
Step 4
82-9600
FLH/Batwing models: (cont.)
6. Lift away and unplug headlight to
remove outer fairing. (Figure B)
7. Unbolt and remove inner fairing support
brackets from each side (3/16 Allen &
T-25 Torx screws).
Note the Torx screw is also a shared
speaker screw. (Figure C)
8.
Remove the remaining speaker
screws and the speaker.
Continue to kit assembly
Fairing Disassembly
(Figure B) (Figure C)

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 82-9600

¿Necesitas ayuda?

Si necesitas ayuda con Metra 82-9600 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales