Metra 95-3031B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 95-3031B (4 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/21/20 INST95-3031B
I N S TA L L AT I O N I N S T R U C T I O N S
95-3031B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DDIN radio provision
Painted scratch resistant matte black to match the factory finish
KIT COMPONENTS
• A) Radio bezel • B) Radio brackets
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
Wiring Harness: See metraonline for harness
interface solutions
Antenna Adapter: 40-CR10
(sold separately)
Chevrolet Captiva Sport (w nav) 2014-2015
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
A B
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the trim panel on the
top of the dash. (Figure A)
2. Remove (2) 9/32” screws securing
the radio trim panel, then unclip and
remove. (Figure B)
3. Unclip the entire lower console panel
and set aside. (Figure C)
4. Remove (4) 9/32” screws securing the
radio. Slide the radio out, then unplug
and remove.
Continue to Kit Assembly
(Figure B)(Figure A) (Figure C)
DASH DISASSEMBLY
REV. 1/21/2020 INST95-3031B 3
(Figure A) (Figure B)
KIT ASSEMBLY
1. Slide the radio brackets radio into the
bezel. (Figure A)
2. Slide the radio between the radio
brackets, then secure using screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Slide the radio into the dash, then
secure using the factory screws.
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.

Especificaciones del producto

Marca: Metra
Categoría: Niet gecategoriseerd
Modelo: 95-3031B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 95-3031B haz una pregunta a continuación y otros usuarios te responderán




Niet gecategoriseerd Metra Manuales

Niet gecategoriseerd Manuales

Últimos Niet gecategoriseerd Manuales