Metra 95-5806 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 95-5806 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 7/3/2014 INST95-5806
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 95-5806
Double DIN radio provision
A) Double DIN brackets
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: • 70-1770 - Ford harness 1985-2004 • 70-1784 - VW/Audi 1980-up
Antenna Adapter: 40-VW10 - VW/Audi Antenna adapter 1998-up
Socket wrench • 86-5618 Radio removal keys Phillips screwdriver
;663:9,8<09,+
Ford/Mercury 1999-2004
95-5806
A
Dash Disassembly
– Ford Focus 2000-2004 ......................................... 2
– Mercury Cougar 1999-2002 ................................. 2
Kit Assembly
– Double DIN radio provision .................................... 3
Table of Contents
2
1. Using Metra’s 86-5618 pull the factory radio
from the dash and disconnect wiring.
(Figure A)
Continue to kit assembly
Ford Focus 2000-2004, Mercury Cougar 1999-2002
(Figure A)
Dash Disassembly 95-5806
Double DIN radio provision
3
1. Attach the double DIN brackets
to the radio using the screws that
came with the radio. (Figure A)
2. Trim the sub-dash in the upper left
corner. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
4. Insert radio and kit into dash and
snap assembly into the dash.
Note: Some aftermarket radios
will not fit into the opening of the
original bezel. If this is the case,
with your installation, the bezel will
have to be carefully trimmed to
allow the radio to snap-in.
5. Reassemble dash in reverse
order of disassembly. (Figure A) (Figure B)
Kit Assembly 95-5806

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 95-5806

¿Necesitas ayuda?

Si necesitas ayuda con Metra 95-5806 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales