Metra 95-6534B Manual de Usario

Metra No categorizado 95-6534B

Lee a continuación 📖 el manual en español para Metra 95-6534B (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

REV. 3/7/2016 INST95-6534B

Installation instructions for part 95-6534B

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling

the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

• ISO DDIN radio provision

• ISO DDIN radio provision with pocket

• Painted matte black

• A1) ISO DDIN trim panel • A2) ISO DDIN trim panel with pocket

• B) Trim panel retainers • C) Radio brackets

• D) Cut template • E) (4) #8 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • XSVI-6502-NAV • CHTO-01

Antenna Adapter: • 40-CR10

• Panel removal tool • Phillips screwdriver

• 7mm socket wrench • Cutting tool or hand saw

TOOLS REQUIRED

Dodge / Jeep 2007-2008

95-6534B

A1 A2 C D

Dash Disassembly ..................................................2

Kit Preparation ........................................................3

Kit Assembly

– ISO DDIN radio provision ...................................... 3

Table of Contents

APPLICATIONS

DODGE

Caliber 2007-2008

JEEP

Compass 2007-2008

Patriot 2007-2008

95-6534B

Dodge Caliber 2007-2008

1. Unsnap and move the shifter trim to

the side. (Figure A)

2. Unsnap the radio trim panel and

then remove (4) Phillips screws

securing the climate controls to the

back of the panel, before removing

the panel completely. (Figure A)

3. Remove (4) 7mm screws securing

the radio and then remove.

4. Remove (4) Phillips screws securing

the metal radio sub-dash bracket to

the vehicle and then remove.

Continue to kit preparation

Jeep Compass/Patriot 2007-2008

1. Remove the shift knob.

2. Remove the center portion of the

shifter trim panel. (Figure A)

3. Remove the (2) 7mm screws

exposed and then remove the outer

shifter trim panel. (Figure A)

4. Remove the top dash panel above

the AC vents.

Remove the (2) exposed 7mm screws

at the top of the radio trim bezel.

6. Unsnap the radio trim panel and then

remove (4) Phillips screws securing

the climate controls to the back of

the panel, before removing the panel

completely. (Figure B)

7. Remove (4) 7mm screws securing

the radio and then remove.

8. Remove (4) Phillips screws securing

the metal radio sub-dash bracket to

the vehicle and then remove.

Continue to kit preparation

Dash Disassembly

(Figure A) (Figure B)(Figure A)

1 2 3 4 5 6

123 4 5 6

95-6534B

Place the cut template onto the

back of the factory center dash

trim panel and mark the inside area

to be cut with a pencil. (Figure A)

2. Remove the cut template, then

cut the area marked out in the

previous step.

3. Place the ISO DDIN trim panel

over the front of the factory panel,

covering the cut portion of the

panel. For the Caliber, use the ISO

DDIN trim panel. For the Compass

and Patriot, use the ISO DDIN trim

panel with pocket.

4. Secure the Trim panel retainers

to the back of the ISO DDIN trim

panel using the (4) #8 x 3/8”

Phillips screws provided. (Figure B)

Continue to kit assembly

Kit Preparation

(Figure A)

(Figure B)

Kit Assembly

ISO DDIN radio provision

1. Attach the radio brackets to the

radio using the screws supplied

with the radio.

2. Locate the factory wiring harness

and antenna connector in the

dash, and complete all necessary

connections to the radio. Metra

recommends using the proper

mating adapter from Metra and/or

AXXESS. Test the radio for proper

operation.

3. Reassemble the dash in reverse

order of disassembly.

Especificaciones del producto

Marca:	Metra
Categoría:	No categorizado
Modelo:	95-6534B
Color del producto:	Blauw
Peso.:	2380 g
Altura (mín.):	533.4 mm
Altura (máx.):	1530.35 mm
Capacidad máxima de peso:	3.5 kg
Material:	Aluminium
Destinado a:	Digitaal/filmcamera
Estuche de almacenamiento:	Ja
Ángulo de rotación:	360 °
Longitud cuando está plegado:	571.5 mm
Ruedas:	Nee
Número de piernas/piernas:	3 poot/poten
Número de secciones de pierna:	3
Tipo de bloqueo de pierna:	Omklapvergrendeling
Tipo de cabeza de trípode:	Pan