Metra 95-6535B Manual de Usario

Metra No categorizado 95-6535B

Lee a continuación 📖 el manual en español para Metra 95-6535B (4 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

REV. 1/25/2017 INST95-6535B

INSTALLATION INSTRUCTIONS FOR PART 95-6535B

CAUTION!

All accessories, switches, climate controls panels,

and especially air bag indicator lights must be connected before

cycling the ignition. Also, do not remove the factory radio with

the key in the on position, or while the vehicle is running.

• ISO DDIN radio provision

• Painted matte black

• A) Radio trim panel • B) Radio brackets

20;-,(;<9,:

20;*64765,5;:

>0905.(5;,55(*655,*;065: (sold separately)

Wiring Harness: • XSVI-6523-NAV

Antenna Adapter: • 40-EU55

• Panel removal tool • Cutting tool

• T-25 Torx screwdriver

;663:9,8<09,+

Fiat 500X 2016-up

95-6535B

Table of Contents

Dash Disassembly ................................................. 2

Kit Assembly

– ISO DDIN radio provision ...................................... 3

95-6535B

Dash Disassembly

1. Open upper storage compartment

on passenger side. (Figure A)

2. Unclip, unplug, and remove painted

hazard button panel below the radio.

(Figure A)

3. Unscrew (2) T-25 Torx screws at the

bottom of the radio trim. (Figure B)

4. Unclip the radio trim. (Figure B)

5. Unscrew (4) T-25 Torx screws

securing the radio into the dash.

(Figure C)

6. Unplug and remove the radio from

the dash. (Figure C)

7. Cut the shaded areas in the dash

cavity to gain suitable depth for the

new radio chassis (CAUTION: The

vents are located directly behind the

area to be cut, use extreme caution

to not cut into them). Be careful, you

may want to make multiple cuts.

(Figures D, E)

Continue to kit assembly.

(Figure A)

(Figure C)

(Figure B)

(Figure E)

(Figure D)

Be careful not to cut

into the vents!

First cut

Second cut

Remove shaded area

95-6535B

Kit Assembly

(Figure A) (Figure B)

ISO DDIN radio provision

1. Attach the radio brackets to the

radio using the screws supplied

with the radio. (Figure A)

2. Insert the radio trim panel into the

factory radio trim removed in step

4 of dash disassembly. (Figure B)

3. Locate the factory wiring harness

and antenna connector in the dash,

complete all necessary connections

to the radio and test the radio

for proper operation. Metra

recommends using the proper

mating adapter from

Metra and/or AXXESS.

4. Mount the radio into the dash using

the factory hardware.

5. Reassemble the dash in the reverse

order of disassembly.

Especificaciones del producto

Marca:	Metra
Categoría:	No categorizado
Modelo:	95-6535B
Color del producto:	Transparent, White
Pantalla incorporada:	Nee
Ancho del embalaje:	110 mm
Empaquetadura en profundidad:	265 mm
Altura del embalaje:	285 mm
Capacidad del tanque de agua:	2.5 l
Tipo de filtro de agua:	Waterfilter in kan
Capacidad de agua purificada:	1 l