Metra 95-7391B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 95-7391B (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 7/6/18 INST95-7391B
I N S TA L L AT I O N I N S T R U C T I O N S
95-7391B
KIT FEATURES
ISO DDIN radio provision
Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (4) #8 x 3/8” Phillips screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Cutting tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: Please visit metraonline.com for
wiring harness options
Antenna Adapter: 40-KI11
Steering Wheel Control Interface: ASWC-1
A B C
Kia Rio/Rio 5-Door 2018-up*
*Visit for up-to-date vehicle specific applications.MetraOnline.com
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the top half of the
steering column shroud and gauge
cluster trim panel. These panels are
connected together by a piece of
material and will come out as one piece.
(Figure A)
2. Unclip and remove the a/c vent panel
surrounding the radio. (Figure B)
3. Remove (4) screws securing the radio.
Slide the radio out, then unplug and
remove the radio.
Continue to Kit Preparation
(Figure B)
(Figure A) (Figure A)
DASH DISASSEMBLY KIT PREPARATION
1. Cut the shaded area in the sub-dash to
allow room for the aftermarket radio.
(Figure A)
Continue to Kit Assembly
Remove shaded area
REV. 7/6/2018 INST95-7391B 3
KIT ASSEMBLY
1. Secure the
radio brackets
to the
radio
trim pane
l using the (4) #8 x 3/8”
Phillips screws provided. (Figure A)
2. Slide the radio into the bracket/panel
assembly, then secure it using the
screws provided with the radio.
(Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Secure the radio assembly to the dash
using the factory screws.
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.
(Figure A) (Figure B)

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 95-7391B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 95-7391B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales