Metra 95-7617GHG Manual de Usario

Metra No categorizado 95-7617GHG

Lee a continuación 📖 el manual en español para Metra 95-7617GHG (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
INSTALLATION INSTRUCTIONS FOR PART 95-7617GHG
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 4/3/2013 INST95-7617GHG
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
• Double DIN radio provision
Painted Grey High Gloss
A) Radio Trim PanelB) Radio Brackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552 2010-Up Nissan Wire Harness • 70-7554 2010-Up Nissan Wire Harness
Antenna Adapter: • 40-NI12 2010-Up Nissan Antenna Adapter
• Panel removal toolPhillips screwdriver • Socket Wrench
TOOLS REQUIRED
(Sedan)
A B
Dash Disassembly
Nissan Altima 2013-up ......................................... 2
Kit Assembly
Double DIN radio provision .................................... 3
99-7617GHG
Dash Disassembly
1. Unclip the right side of the driver’s
knee bolster panel next to the
center console and let hang. Note:
There is no need to completely
remove the panel. (Figure A)
2. Unclip and remove the (2) silver
side trim panels from each side of
the factory radio. (Figure B)
3. Unclip and remove trim panel
below the a/c control panel.
(Figure A)
(Figure D)
(Figure B)
(Figure E)
(Figure C)
(Figure F)
4. Remove (4) Phillips screws
securing the factory radio, a/c
control and a/c vents. (Figure C)
5. Remove the a/c controls.
(Figure D)
6. Remove the a/c vent panel.
(Figure E)
7. Remove the factory radio.
(Figure F)
8. If equipped there may be an a/c
amp present attached under the
radio remove (2) Phillips screws
securing the a/c amp.
Continue to kit assembly
99-7617GHG
Kit Assembly
Double DIN radio provision
1. If equipped attach the a/c amp to
the radio brackets with the factory
hardware. (Figure A)
2. Mount the DDIN radio to the radio
brackets using the screws supplied
with the radio. (Figure A)
3. Mount the radio/bracket assembly
into the dash.
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
5. Reassemble dash in reverse order
of disassembly.
(Figure A)

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 95-7617GHG

¿Necesitas ayuda?

Si necesitas ayuda con Metra 95-7617GHG haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales