Metra 95-7812B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 95-7812B (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
REV. 6/17/2016 INST95-7812B
INSTALLATION INSTRUCTIONS FOR PART 95-7812B
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
ISO DDIN radio provision
Painted scratch resistant matte black
A) Radio trim panel • B) Radio brackets C) (6) Plastic panel clips
20;-,(;<9,:
20;*64765,5;:
Panel removal tool • Phillips screwdriver
;663:9,8<09,+
Honda Civic LX 2016-up
95-7812B
A
Table of Contents
B C
Dash Disassembly ..................................................2
Kit Assembly ...........................................................3
>0905.(5;,55(*655,*;065: (sold separately)
Wire harness: 70-1731 • XSVI-1731-NAV (Only required to retain NAV outputs)
Antenna adapter: • 40-HD11
95-7812B
2
1. Unsnap and remove the side trim
panels from the center console.
(Figure A)
2. Unsnap and remove the climate
control panel. (Figure B)
3. Remove (2) Philips screws securing
the radio and then remove.
(Figure C)
Continue to kit assembly
Dash Disassembly
(Figure B)(Figure A) (Figure C)
95-7812B
3
Kit Assembly
ISO DIN radio provision with pocket
1. Attach the supplied (6) plastic clips
to the (Figure A)radio trim panel.
2. Attach the radio brackets to the
radio trim panel. (Figure B)
3. Slide the radio into the assembly,
and then secure it using the screws
supplied with the radio. (Figure C)
4. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
5. Install the completed assembly into
the dash, and then reassemble
the dash in reverse order of
disassembly.
(Figure A) (Figure C)(Figure B)

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 95-7812B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 95-7812B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales