Metra 99-3100 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-3100 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Installation Kit
Tools Required
120 99-3100
Flat Blade
Screwdriver
Parts
Supplied:
Mounting
Bracket
(2) Screws
Saturn
Revision 07/14/99
DIN Assembly
1. Remove fromshaft inserts receiver
mounting bracket by sliding inserts to
center of opening and spreading
opening slightly apart (Figure 1).
2. Remove DIN sleeve from receiver.
3. Slide sleeve into receiver mounting
bracket and secure sleeve by bending
the securing tabs. (Figure 2).
4. Slide receiver into sleeve.
Page 1 of 2
Receiver Mounting Bracket
DIN Sleeve
IMPORTANT
Before starting, compare items on your invoice with items
received. Carefully check through packaging material. If an
item is missing, please call:
Crutchfield
FIGURE 1
FIGURE 2
Shaft Inserts
Securing Tabs
Bend tabs after sleeve
is inside mounting bracket.
*120993100*
®
Copyright 2001 Crutchfield Corporation
at 1-888-955-6000
Installation Kit
Tools Required
120 99-3100
Deep Socket
(size depends upon receiver)
Saturn
Shaftnuts (supplied with receiver)
1. Choose the proper (supplied with your order) to spacers
allow receiver nosepiece to extend 1/8 to 1/4” beyond
face of receiver mounting bracket (Inset).
2. Secure receiver and faceplate to mounting bracket with
spacers and shaftnuts as shown.
3. Attach receiver control knobs.
Faceplate
Receiver Mounting Bracket
Shaft Assembly Page 2 of 2
1/8” - 1/4”
Spacer
INSET
Spacers (supplied with your order)
Control Knobs
(Generic Illustration)
®
Copyright 2001 Crutchfield Corporation

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-3100

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-3100 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales