Metra 99-5718 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-5718 (13 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/13
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
APPLICATIONS
KIT FEATURES
KIT COMPONENTS
TOOLS REQUIRED
1-800-221-0932 metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-5718
FORD TAURUS
2000 - 2003
99-5718
• ISO & DIN Head Unit Provision w/ Pocket
• DDIN Head unit provisions
• Integrated auto climate controls and display
• Painted Scratch Resistant Matte Black
A) Radio Housing B) ISO Brackets C) ISO Trim Plate D) Pocket
E) DDIN Brackets F) DDIN Trim Plate G) In-Car Temp Sensor Housing • H) Harness Extension
• Radio Removal Tool (Metra Part #86-5618) • Phillips Screwdriver
• Panel Removal Tool • Socket Set • Cutting Tool or File • T10 Torx Screwdirver
CDE
FGH
B
A
TABLE OF CONTENTS
DASH DISASSEMBLY
s&/2$4!5253
KIT PREPARATION
s&/2$4!5253
KIT ASSEMBLY
s&/2$4!5253
./4%2EFER!LSOTOTHEINSTRUCTIONSINCLUDEDWITHTHEAFTERMARKETRADIO
*NOTE: This product has software that can be flashed via the AXXESS
53"#!"CABLEAND!88%33).4%2&!#%#/-0LEASECONTACTTHE
Metra tech support team if you feel this product is not performing
PROPERLY
Metra recommends MECP certified
technicians
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
99-5718
1
FORD TAURUS 2000- 2003
99-5718 DASH DISASSEMBLY
Disconnect the negative
battery terminal to prevent an
accidental short circuit.
Using Metra’s 86-5618, pull
the factory radio/climate
control panel from the dash.
(Fig. A)
Disconnect the audio system
connectors, blower motor
switch connector, vacuum
hose harness, a/c damper
door switch connector, and
potentiometer connector.
Remove the panel.
Remove (2) torx-head screws
securing the mounting clips to
the sides of the factory
radio/climate control panel
and remove the clips. (Fig. B)
Mount the clips to the
Integrated Mounting Kit with
the same torx-head screws.
1
2
3
A
B
4
5

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-5718

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-5718 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales