Metra 99-5847CH Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-5847CH (14 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/14
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 6/10/20 INST99-5847CH
I N S TA L L AT I O N I N S T R U C T I O N S
99-5847CH
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Touchscreen display for climate and personalization features
Integrated hazard button and passenger airbag indicator
Painted Charcoal Grey
KIT COMPONENTS
• A) Radio/Display trim panel with touchscreen display • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws for pocket
• E) (2) #4 x 1/2” Phillips screws for A/C Vent to Housing
• F) (2) Panel clips • G) Antenna adapter and harnesses (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32” Socket wrench • Torx screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
Axxess Interface Installation ............................4-12
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface built into touchscreen
Antenna Adapter: Included
Ford Explorer
(with 4.2” screen)
2011-2015
A B C D E
F
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the (2) trim panels
from the left and right side of the factory
radio. (Figure A)
2. Remove (4) 9/32” screws securing the
radio/climate control panel to the dash.
(Figure B)
3. Unclip, unplug, and remove the factory
radio/climate control panel. (Figure C)
4. Remove (4) 9/32” screws securing the
radio chassis, then unplug and remove.
(Figure D)
5. Remove (4) 9/32” screws securing the
factory display, then unplug and remove.
(Figure E)
Continue to Kit Preparation
(Figure B)
(Figure E)(Figure D)
(Figure A) (Figure C)
REV. 6/10/2020 INST99-5847CH 3
KIT ASSEMBLYKIT PREPARATION
(Figure A)
ISO DIN radio provision with pocket
1. Secure the
pocket
to the
radio brackets
using the (4) #8 x 3/8” Phillips pan head
screws supplied. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio between
radio brackets,
then secure with the screws supplied
with the radio. (Figure A)
Continue to Axxess Interface Installation
1. Remove (2) Torx screws securing the a/c
vents to the factory radio/climate control
panel, then unclip and remove them
from the panel. (Figure A)
2. Attach the a/c vents to the radio trim
panel using the (2) #4 x 1/2” Phillips
screws provided with the kit.
3. Attach the panel clips provided with the
kit onto the radio trim panel. The factory
clips may also be used if desired.
Continue to Kit Assembly
ISO DDIN radio provision
1. Secure the radio to the
radio brackets
using the screws supplied with the
radio. (Figure A)
Continue to Axxess Interface Installation
(Figure A)
(Figure A)

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-5847CH

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-5847CH haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales