Metra 99-6502 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-6502 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Installation Kit
Tools Required
120 99-6502
Flat Blade
Screwdriver
Parts
Supplied:
Mounting
Bracket
Dodge/Chrysler
Revision 09/13/01
DIN Assembly
1. Using a utility knife, cut out shaft
supports to create the DIN opening
as shown (Figure 1).
2. Remove DIN sleeve from receiver.
3. Slide DIN sleeve into receiver
mounting bracket and secure by
bending securing tabs (Figure 2).
4. Slide receiver fully into sleeve.
5. Install receiver assembly following
instructions in the for Mastersheet
your particular vehicle.
Page 1 of 2
Receiver Mounting Bracket
DIN Sleeve
IMPORTANT
Before starting, compare items on your invoice with items
received. If any parts are missing, first carefully check through
packaging material. If an item is missing, please call:
Crutchfield
Spacer Plate
(for shaft receiver only)
Utility Knife
Shaft Supports
FIGURE 1
FIGURE 2
Securing Tabs
Bend tabs after sleeve
is inside mounting bracket. *120996502*
®
Copyright 2001 Crutchfield Corporation
at 1-888-955-6000
Installation Kit
Tools Required
120 99-6502
Deep
Socket
Dodge/Chrysler
Shaftnuts (supplied with receiver)
1. Choose the proper (supplied with your order) spacers
to allow receiver nosepiece to extend 1/8” to 1/4
beyond face of receiver trimplate (Inset).
2. Secure receiver, spacer plate faceplate receiver and to
mounting bracket using spacers and shaftnuts as
shown.
3. Attach receiver control knobs.
4. Install receiver assembly following instructions
in the Mastersheet for your particular vehicle.
Faceplate
Receiver Mounting Bracket
Shaft Assembly Page 2 of 2
Control Knobs
Spacer Plate
(size depends upon receiver)
Spacers (supplied with your order)
Receiver Mounting Bracket
Spacer
1/8” - 1/4”
INSET
®
Copyright 2001 Crutchfield Corporation

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-6502

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-6502 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales