Metra 99-6519 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-6519 (12 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 2/27/18 INST99-6519
I N S TA L L AT I O N I N S T R U C T I O N S
99-6519
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted matte black (99-6519B), silver (99-6519S)
or carbon fiber (99-6519CF)
KIT COMPONENTS
• A) Radio housing trim panel • B) Radio housing • C) Radio brackets • D) Pocket • E) (6) Panel clips • F) (6) #6 x 3/8” Phillips screws
• G) (4) #8 x 3/8” Phillips screws
A B C D E
F G
Dodge Charger/Magnum (without factory NAV)
2005-2007
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 7mm Socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................4
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: XSVI-6502-NAV • CHTO-01
Antenna Adapter: 40-CR10
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove entire panel
surrounding radio and climate controls,
including A/C vents. (Figure A)
2. Remove (4) 7mm screws securing radio
to dash and remove radio. (Figure B)
3. Remove factory vents and climate
controls from the factory radio panel
and transfer to the
99-6519B radio
housing trim panel
using the screws
provided in this package.
Continue to Kit Assembly
DASH DISASSEMBLY
(Figure A) (Figure B)
REV. 2/27/2018 INST99-6519 3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio
housing
by sliding the grooves in the
brackets, into the housing. The following
step will secure the brackets in place.
(Figure A)
2. Attach the
pocket
to the
radio brackets
using the (4) #8 x 3/8” Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/pocket
assembly, and then secure it using the
screws supplied with the radio.
(Figure C)
(Figure B)
(Figure C)(Figure A)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
6. Secure the radio assembly to the dash
using the factory screws.
7. Attach the (6) panel clips provided
to the
99-6519B radio housing trim
panel, then
reassemble the dash in
reverse order of disassembly using the
99-6519B radio housing trim panel
to
complete the installation.

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-6519

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-6519 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales