Metra 99-7308 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7308 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Installation Kit
Tools Required
120 99-7308
Flat Blade
Screwdriver
Parts
Supplied:
Mounting
Bracket
Hyundai
Revision 06/16/99
DIN Assembly
1. Using a utility knife, cut out shaft
supports to create a DIN opening
as shown (Figure 1).
2. Remove DIN sleeve from receiver. Slide DIN
sleeve into receiver mounting bracket and
secure by bending securing tabs (Figure 2,
lower right).
3. Slide receiver fully into sleeve.
Page 1 of 2
Receiver Mounting Bracket
DIN Sleeve
IMPORTANT
Before starting, compare items on your invoice with items
received. If any parts are missing, first carefully check through
packaging material. If an item is missing, please call:
Crutchfield
FIGURE 1
FIGURE 2
Shaft Supports
Utility Knife
Bend tabs after sleeve
is inside mounting bracket.
®
Copyright 1999 Crutchfield Corporation
at 1-888-955-6000
Installation Kit
Tools Required
120 99-7308
Deep
Socket
Hyundai
Shaftnuts (supplied with receiver)
1. Choose the proper spacers (supplied with your order) to
allow receiver nosepiece to extend 1/8” to 1/4” beyond
face of (see Inset).receiver mounting bracket
2. Secure receiver and faceplate to mounting bracket with
spacers and shaftnuts as shown.
3. Attach receiver control knobs.
Faceplate (supplied with receiver)
Receiver Mounting Bracket
Shaft Assembly Page 2 of 2
1/8” - 1/4”
*120997308*
INSET
Spacers (supplied with your order)
Control Knobs
Spacer
(size depends
upon receiver)
®
Copyright 1999 Crutchfield Corporation

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-7308

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7308 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales