Metra 99-7384B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7384B (15 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/15
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 5/27/20 INST99-7384B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7384B
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) Climate display • E) (4) #8 x 3/8” Phillips screws • F) (2) Panel clips
• G) Wiring harness (not shown) • H) 3.5mm connector with stripped leads (not shown) • I) Antenna adapter (not shown) • J) ASWC-1 (not shown)
• K) AX-CAM6V (not shown)
A B C
F
D E
Kia Optima 2017-2020*
Visit for up-to-date vehicle specific applications.MetraOnline.com
* With auto climate controls and Without factory amplifier
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
–ISO DIN radio provision with pocket ..................5
–ISO DDIN radio provision .....................................5
Wiring Instructions ...........................................6-13
Final Assembly .......................................................9
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Included with kit
Antenna Adapter: Included with kit
Steering wheel control interface: Included with kit
12v to 6v camera stepdown: Included with kit
KIT FEATURES
ISO DIN radio provision with pocket
• ISO DDIN radio provision
Includes electronics with laser etched graphics to display fan speed,
mode, temp, and air bag indicator.
Retains factory steering wheel controls and back up camera.
Includes wiring and antenna adapter.
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Open the glove box and remove the
trim at the top of the opening, and then
remove the (2) Phillips screws exposed.
(Figure A)
2. Unclip the trim that runs along the
dash from the right side A/C vent to the
steering column, and then remove the
(2) Phillips screws securing the A/C vent/
hazard panel. (Figure B)
3. Unclip and remove the right side trim
panel from the center console, and then
remove the (1) Phillips screw securing
the A/C vent/hazard panel. (Figure C)
Continued on the next page
(Figure A) (Figure C)(Figure B)
REV. 5/27/2020 INST99-7384B 3
DASH DISASSEMBLY
(CONT.)
4. Unclip the A/C vent/hazard panel,
disconnect the hazard switch, and then
remove the panel. (Figure D)
5. Using caution not to break the panel,
carefully unclip and remove the radio
trim panel. (Figure D)
This panel is incredibly difficult to Note:
remove. There are (14) clips that attach
this panel to the vehicle. Unclip one of
the clips from the bottom, then work up.
This method seems to work best. Take
note that the clips will clip back in unless
something is holding the panel slightly
out. (Figure E)
6. Remove the (4) Philips screws securing
the radio and then remove.
7. Remove (2) Phillips screws securing the
climate/radio control panel. Unclip the
panel, then unplug and remove
the panel. (Figure F)
Continue to Kit Preparation
(Figure D)
(Figure E)
(Figure F)
Back side of panel

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-7384B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7384B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales