Metra 99-7394B Manual de Usario

Metra No categorizado 99-7394B

Lee a continuación 📖 el manual en español para Metra 99-7394B (8 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

Metra. The World’s Best Kits.

I N S TA L L AT I O N I N S T R U C T I O N S

99-7394B

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT FEATURES

• ISO DIN radio provision

• ISO DDIN radio provision †

• Pioneer modular DDIN radio provision †

• Painted matte black

KIT COMPONENTS

• A) Radio housing (front) • B) Radio housing (rear) • C) Radio brackets • D) Pioneer adapter brackets • E) Blank panel

• F) #4 x 3/8” Phillips screws (5) • G) #8 x 1/2” Phillips screws (4) • H) Panel clips (3) • I) Panel clips (4) TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

TABLE OF CONTENTS

Dash Disassembly ................................................... 2

Kit Assembly

- ISO DIN radio provision .........................................3

- ISO DIN radio provision ........................................4

- Pioneer modular DDIN radio provision .............. 5

WIRING & ANTENNA CONNECTION

(sold separately)

Wire harness: • 70-7306

Antenna adapter: • 40-KI11

Steering wheel control interface: • ASWC-1

12v-to-6v camera step-down: • AX-CAM6V

A B C D E

F H IG

Kia Forte 2019-up

Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com

speciﬁc applications

† This kit can only be used with an ISO DDIN radio with an “L” shaped chassis design,

with the radio chassis at the bottom of the screen. As of this writing, only the Alpine

INE-W967HD (discontinued, replaced by INE-W977HD), iLX-107, and iLX-207 have this

design. Also, The Pioneer modular radios, DMH-C2550NEX and DMH-C2500NEX, can be

used with the included adapter brackets

1.800.221.0932

MetraOnline.com

DASH DISASSEMBLY

1. Unclip the instrument panel trim and

move aside just enough to clear the

silver panel below the radio. (Figure A)

2. Starting from the left, unclip and remove

the silver trim panel below the radio.

(Figure B)

3. Unclip, unplug, and remove the center

a/c vent and hazard assembly. (Figure C)

4. Unclip and remove the trim panel

behind the radio by pulling straight up.

There are (5) clips securing this panel to

the dash. (Figure D)

5. Remove (4) Phillips screws securing

the radio, two up top, and two down

below. Unclip and slide the radio out,

then unplug and remove the radio.

Remove the (4) panel clips for reuse in

Kit Assembly. (Figures E and F)

Continue to Kit Assembly

(Figure A) (Figure D)

(Figure B) (Figure E)

(Figure C) (Figure F)

REV. 6/28/2019 INST99-7394B 3

ISO DIN radio provision

1. Secure the to the blank panel radio

housing (front) using (2) #4 x 3/8”

Phillips screws provided. (Figure A)

2. Attach (3) provided onto the panel clips

radio housing (front). (Figure B)

3. radio housing (front) Snap the to the

radio housing (rear), then secure using

(3) #4 x 3/8” Phillips screws provided

(Figure C)

4. Secure the radio brackets to the radio

housing assembly using (4) #8 x 1/2”

Phillips screws provided. (Figure D)

5. Attach the (4) factory panel clips to the

radio housing assembly.

Note: (4) have been Panel clips

provided only if the factory clips are

missing or damaged.

KIT ASSEMBLY

6. Remove the metal DIN sleeve and trim

ring from the aftermarket radio.

7. Slide the radio into the radio housing

assembly through the back, then secure

using screws supplied with the radio.

(Figure E)

8. Locate the factory wiring harness and

antenna connector in the dash and

complete all necessary connections to

the radio. Metra recommends using

the proper mating adapter from Metra

and/or Axxess. Test the radio for proper

operation.

9. Secure the radio assembly to the dash

using the factory screws.

10. Reassemble the dash in reverse

order of disassembly to complete the

installation.

(Figure A) (Figure D)

(Figure B) (Figure E)

(Figure C)

Especificaciones del producto

Marca:	Metra
Categoría:	No categorizado
Modelo:	99-7394B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7394B haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

No categorizado Metra Manuales

Metra 71-017C Manual de Usario

26 Septiembre 2024

Metra AXSP-HK Manual de Usario

26 Septiembre 2024

Metra 109-TO7 Manual de Usario

24 Septiembre 2024

Metra 95-8273B Manual de Usario

19 Septiembre 2024

Metra 95-7822 Manual de Usario

19 Septiembre 2024

Metra 82-8703 Manual de Usario

19 Septiembre 2024

Metra 88-00-9004 Manual de Usario

19 Septiembre 2024

Metra 82-9101 Manual de Usario

19 Septiembre 2024

Metra 95-7021HG Manual de Usario

19 Septiembre 2024

Metra 82-5608 Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024

Philips 43PUL7672 Manual de Usario

27 Octubre 2024

Manhattan 461504 Manual de Usario

27 Octubre 2024

Sungrow SG125HV Manual de Usario

27 Octubre 2024

Schneider CCT724319 Manual de Usario

27 Octubre 2024

Technoline WS 250 Manual de Usario

27 Octubre 2024

Livarno IAN 354423 Manual de Usario

27 Octubre 2024

Kupper 12152 Manual de Usario

27 Octubre 2024

JennAir CARBON24L Manual de Usario

27 Octubre 2024