Metra 99-7515B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7515B (9 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/9
INSTALLATION INSTRUCTIONS FOR PART 99-7515
99-7515B/
99-7515HG
APPLICATIONS
Mazda RX-8
2009-2010
KIT FEATURES
DIN Head Unit Provision with Pocket
ISO DIN Head Unit Provision with Pocket
DDIN Head Unit Provision
ISO Stacked Head Unit Provision
Painted to Match Factory Finishes
TWO FINISHES AVAILABLE:
99-7515B=BLACK, 99-7515HG=GLOSS BLACK
A) Radio Housing B) ISO Brackets C) ISO Trim Plate D) DDIN Brackets
E) DDIN Trim Plate F) Pocket G) (5) Plastic Snaps
KIT COMPONENTS
A
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
TOOLS REQUIRED:
Small Flat Blade Screwdriver Panel Removal Tool
Phillips Screwdriver Socket Set Cutting Tool
70-7903 - 2001-up Mazda harness
1-800-221-0932
© COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION
www.metraonline.com
BD
E
C
FG
Dash Disassembly
-
Mazda RX-8 2009-2010 . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .1,2
Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Kit Assembly
- DIN Head Unit Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . 4
- ISO DIN Head Unit Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . 5
- Double DIN / Stacked ISO DIN Head Unit Provision . . . . . . . . . . . . . . . 6
TABLE OF CONTENTS
99-7515
*Note:
Refer also to the instructions included with the aftermarket radio.
Metra recommends MECP certified
technicians.
K
NOWLEDGE IS
P
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
99-7515 DASH DISASSEMBLY
MAZDA RX-8 2009-2010
A
B
C
FM1 877
AC
D
1
1
Unclip and remove the shifter trim
panel. (
Figure B)
Remove (2) Phillips screws from the
bottom of the radio/climate control
panel. (Figure D)
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
3
Unscrew the shift knob counter clock-
wise to remove. (
Figure A)
2
Remove (2) Phillips screws from the
bottom of the ashtray assembly then
unclip and remove the assembly.
(
Figure C)
4
Unclip and remove the knee panel on
the driver’s side under the steering
column (
Figure E)
then remove (1) 10
MM bolt from the side of the radio
bracket. (
Figure F)
6
5
Continued on page 2.

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-7515B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7515B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales