Metra 99-7522B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7522B (8 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.®MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 9/6/17 INST99-7522B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7522B
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted matte black to match factory finish
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) Pocket • D) (4) Panel clips • E) (4) #8 x 3/8” Phillips pan head screws
• F) (4) #8 x 3/8” Phillips truss head screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
. ISO DIN radio provision with pocket ................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7903 • AX-LCD (Mazda6 only)
Antenna Adapter: 40-HD10
A B C D E F
Mazda CX5 2013-2015 2016, CX5 Sport ,
Mazda6 2014-2015
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unsnap and remove the trim panel above the glove box
and climate controls. This panel will include the climate
vents and hazard button. (Figure A)
Note:
Do not cycle the key while the hazard button is
disconnected.
2. Unsnap and remove the trim from around the factory
radio. (Figure B)
3. Remove (2) Phillips screws, and (1) 10mm bolt securing
the factory radio, then unplug and remove.
Continue to Kit Assembly (Figure A)
(
Figure
B)
REV. 9/6/2017 INST99-7522B 3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Install the (4) included
panel clips
to the back of the
radio
housing
.
Note:
The factory clips removed in disassembly can also
be used if so desired.
2. Mount the
pocket
to the
radio brackets
with (4) #8 x 3/8”
Phillips pan head screws supplied. (Figure A)
3. Attach the completed assembly to the
radio housing
with
(4) #8 x 3/8” Phillips truss head screws supplied.
(Figure B)
4. Remove the metal “DIN” sleeve and trim ring from the
aftermarket radio.
5. Slide the radio into the completed assembly and secure
with screws supplied with the radio. (Figure C)
6. Locate the factory wiring harness and antenna connector
in the dash and complete all necessary connections to
the radio. Metra recommends using the proper mating
adapter from Metra and/or AXXESS. Test the radio for
proper operation.
7. Reassemble the dash in reverse order of disassembly.
(Figure A)
(Figure B)
(Figure C)

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-7522B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7522B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales