Metra 99-7526B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7526B (4 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/15/18 INST99-7526B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7526B
KIT FEATURES
ISO DIN radio provision with pocket
Painted matte black
KIT COMPONENTS
• A) Radio trim panel (a) • B) Radio trim panel (b) • C) Radio housing base• D) Radio brackets • E) Radio support bracket • F) (4) Panel clips
• G) (2) #8 x 1/2” Phillips screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm Socket wrench • 1/8” drill bit
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
A B C
G
D E
Mazda 32014-up*
*Visit for up-to-date vehicle specific applications.MetraOnline.com
F
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7903L (without amp)
Antenna Adapter: 40-HD10L
Steering wheel control interface: ASWC-1 & AX-
MAZ28SWC-6V (will also retain backup camera)
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the dashboard trim
panel above the glovebox. This panel
will also include the middle a/c vents.
(Figure A)
2. Remove (1) 10mm screw securing the
radio, then unclip, unplug, and remove
the radio. (Figure B)
Continue to Kit Preparation
(Figure B)
(Figure A)
(Figure A)
(Figure B)
(Figure C)
DASH DISASSEMBLY KIT PREPARATION
1. Secure the
radio support bracket
to
the sub-dash using the factory 10mm
screw removed in dash disassembly.
Directly above this is the factory radio
support brace. Bend this towards the
front of the vehicle to allow room for the
aftermarket radio. (Figure A)
2. Remove the panel clips from the factory
radio, then attach them onto the
radio
housing base
. (Figure B)
3. Clip the
radio housing base
to the dash.
(Figure C)
Continue to Kit Assembly
REV. 5/15/2018 INST99-7526B 3
KIT ASSEMBLY
1. Attach the (4)
panel clips
provided onto
the
radio trim panel (a)
. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Attach the
radio brackets
to the radio
using the screws supplied with the
radio. (Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
Note: The wiring harness and antenna
connector are located in the passenger
kick panel, except for the 2014 i-Sport.
5. Insert the radio into the sub-dash and
secure it using the (2) Phillips screws
provided. New screw holes will have to
be drilled into the sub-dash. Either drive
the screws in, or pre-drill the holes with
a 1/8” drill bit.
6. Attach
radio trim panel (a)
to the
assembly.
7. Starting from the bottom, attach
radio
trim panel (b)
to the assembly.
8. Reassemble the dash in reverse order of
disassembly to complete the installation.
(Figure B)
(Figure A)

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-7526B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7526B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales