Metra 99-7627HG Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7627HG (11 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/11
METRA. The World’s best kits.®metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
REV. 12/14/2017 INST99-7627HG
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 99-7627HG U.S. PATENT # D789,351
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted to match factory components
A) Radio trim panel with climate controls • B) Radio brackets • (C) Keypad assembly • D) Pocket
• E) (4) #8 x 3/8” Phillips screws • F) (2) White panel clips • Axxess interface and harness (not shown)
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: Included with kit Antenna Adapter: • 40-NI12
Panel removal tool • Phillips screwdriver
T-20 Torx driver
;663:9,8<09,+
Nissan Pathfinder 2013-2016
(without NAV) (with color screen)
99-7627HG
A DC E
F
B
Dash Disassembly ..............................................2-3
Kit Preparation ....................................................... 3
Kit Assembly
ISO DIN radio provision with pocket ...................... 4
ISO DDIN radio provision ...................................... 4
Axxess interface installation ..............................5-7
Screen Operation ..............................................8-10
Table of Contents
99-7627HG
2
Dash Disassembly
1. Unclip and remove the trim panel
located between the vehicle screen
and control panel, and then remove
(1) Phillips screw now exposed.
(Figure A)
2. Unclip the screen control panel,
unplug the connectors, and then
remove the keypad assembly from
the panel. Note: The panel will be
reused during kit assembly.
(Figure B)
3. Unscrew (4) Phillips screws securing
the metal brace now exposed above
the radio/climate-control panel, and
then remove the brace. (Figure C)
4. Remove (2) Phillips screws from the
top of the radio/climate-control panel.
(Figure D)
5. Unclip and remove the trim panel
underneath the radio/climate-control
panel. (Figure E)
Continued on next page
(Figure A) (Figure E)
(Figure D)
(Figure B)
(Figure C)
99-7627HG
6. Unclip and remove the radio/climate
control panel. (Figure F).
7. Remove (2) Phillips screws exposed
below the radio chassis, unplug the
connectors, then remove the radio
chassis. (Figure G)
8. Remove the climate control module
located under the radio chassis and
set aside for kit assembly.
(Figure G)
Continue to kit preparation.
3
Kit PreparationDash Disassembly
Kit Preparation
1. Secure the provided keypad
assembly into the screen control
panel removed in step 2 of dash
disassembly using the factory
screws. (Figure A)
2. Attach the supplied (2) white panel
clips radio trim panel with to the
climate controls. (Figure B)
Continue to kit assembly.
(Figure F) (Figure A)
(Figure G) (Figure B)
Climate
control
module

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-7627HG
Color del producto: Zwart
Ancho: 294 mm
Profundidad: 180 mm
Altura: 44 mm
Indicadores LED: Ja
Consumo de energía (máx.): 9.26 W
Certificación: CE, FCC, RoHS
Estándar de red: IEEE 802.3ab, IEEE 802.3p, IEEE 802.3u, IEEE 802.3x
Temperatura de almacenamiento: -40 - 70 °C
Humedad de almacenamiento: 5 - 90 procent
Montaje en bastidor: Nee
Calidad de servicio (QoS): Ja
MDI/MDI-X automático: Ja
Alimentación a través de Ethernet (PoE): Nee
Apilable: Nee
Capacidad de conmutación: 32 Gbit/s
Dirección MAC: 8000 entries
soporte 10G: Nee
Tipo de interruptor: Unmanaged
Número de puertos Ethernet RJ-45 de conmutación básica: 16
Tipo de conmutación básica de puertos Ethernet RJ-45: Gigabit Ethernet (10/100/1000)
Compatibilidad con tramas gigantes: Ja
Autonegociación: Ja
voltaje-de-entrada-de-CA: 100 - 240 V
Frecuencia-de-entrada-de-CA: 50 - 60 Hz
Temperatura de funcionamiento (TT): 0 - 40 °C
Humedad relativa de funcionamiento (VV): 10 - 90 procent
Velocidad de envío: 23.8 Mpps
Longitud máxima del cable: 100 m
marco gigante: 0 - 10000 B
Reenvío de paquetes IP: Ja

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7627HG haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales