Metra 99-7893 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7893 (5 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
Parts
Supplied:
Mounting
Bracket
IMPORTANT
Installation Kit
Tools Required
120 99-7893
Before starting, compare items on your invoice with items
received. If any parts are missing, first carefully check through
packaging material. If an item is missing, please call:
Crutchfield
Honda/Saab
1. Using pliers, break off tabs not
labeled with a on “C” top of
mounting bracket.
Revision 02/02/14
Pliers
If your vehicle is a CR-V or Civic:
*120997893*
If your vehicle is a Prelude:
If installing a DIN receiver, follow instructions on the next page.
If installing a shaft receiver, see page 3.
“P” Tabs
(break off)
2. On bottom of mounting
bracket, break off tabs
labeled “P.
Tabs Not Labeled
(break off)
“C” Tabs
(break off)
Tabs Not Labeled
(break off)
1. Using pliers, break off tabs
labeled with a “C” on top of
mounting bracket.
2. On bottom of mounting
bracket, break off tabs not
labeled “P”.
If installing a DIN receiver, follow instructions on the next page.
If installing a shaft receiver, see page 3.
If your vehicle is a Odyssey:
Do not break off any of the tabs on kit. Proceed to page 2.
If your vehicle is a Saab 9-3:
Proceed to instructions on page 5.
Copyright 2014 Crutchfield Corporation
at 1-888-955-6000
Installation Kit
120 99-7893
Honda
1. Cut out shaft supports receiver mounting bracket in with a utility knife to create the (Figures 1 & 2).DIN receiver opening
2. Install kit and receiver following instructions in the Crutchfield MasterSheet for your particular vehicle.
DIN kit preparation -- Honda
Tools Required
Utility Knife
FIGURE 1 FIGURE 2
Shaft Supports
Receiver Mounting Bracket
DIN Receiver Opening
Bracket with appropriate tabs for CR-V shown.
(See page 3 or 4 if installing a shaft receiver).
2
Copyright 2014 Crutchfield Corporation
Installation Kit
120 99-7893
Honda
Shaftnuts (supplied with receiver)
Spacers (supplied with your order)
Shaft Assembly -- CR-V, Civic & Prelude
Tools Required
Deep Socket
(size depends
upon receiver)
Receiver Mounting Bracket
Control Knobs
Faceplate
See the next page for shaft assembly if your vehicle is an Odyssey.
1. Choose the proper spacers (supplied with your order)
to allow receiver nosepiece to extend 1/8” to 1/4”
beyond face of receiver mounting bracket
(see inset below).
2. Secure receiver and to mounting faceplate
bracket with spacers and as shaftnuts
shown. Attach control knobs.
3. Install receiver assembly following
instructions in the Crutchfield MasterSheet
for your particular vehicle.
INSET
1/8” -1/4”
Spacer
3
Copyright 2014 Crutchfield Corporation

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-7893

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7893 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales