Metra 99-8235CHG Manual de Usario

Metra No categorizado 99-8235CHG

Lee a continuación 📖 el manual en español para Metra 99-8235CHG (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

INSTALLATION INSTRUCTIONS FOR PART 99-8235CHG

APPLICATIONS

REV. 9/19/2012 INST99-8235CHG

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in

beforereconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

• ISO DIN head unit provision with pocket

• Painted Charcoal High-Gloss

• A) Radio Trim Panel • B) Brackets • C) Pocket • D) Clock/Hazard Switch Bracket • E) (3) Panel Clips

• F) (6) #4 x 3/8” Phillips truss head screws • G) (4) #8 x 3/8” Phillips pan head screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1761 Non Amplified Toyota Harness • TYTO-01 Amplified Toyota Interface

Antenna Adapter: • Not Required

• Panel removal tool • Phillips screwdriver • Socket Wrench

TOOLS REQUIRED

A B

Dash Disassembly

– Toyota Tacoma 2012-up ....................................... 2

Kit Assembly

– ISO DIN head unit provision with pocket ............... 3

C D E F G

99-8235CHG

1. Unclip and remove A/C control

panel. (Figure A)

2. Remove (4) 10 mm bolts securing

radio. (Figure B)

3. Unclip and remove entire panel

including hazard switch and clock.

(Figure C)

Dash Disassembly

SCAN

T EXT

PWR VOL

(Figure A)

(Figure D)

(Figure B)

(Figure E)

(Figure C)

4. Remove the left and right radio

brackets from the radio chassis.

(Figure D)

5. Unclip and remove the clock/

hazard switch assembly from the

factory radio housing trim panel.

(Figure E)

Continue to kit preparation

99-8235CHG

Kit Preparation Kit Assembly

1. Attach the clock/hazard switch

bracket to the radio housing using

the (6) #4 x 3/8” Phillips pan head

screws. (Figure A)

WARNING: DO NOT OVERTIGHTEN

SCREWS.

2. Clip the clock/hazard switch

assembly into the 95-8235CHG

radio housing trim panel.

(Figure B)

3. Install the three included panel

clips to the back of the radio

housing trim panel (factory clips

can also be used if desired).

Continue to kit assembly

(Figure A)

(Figure B)

(Figure A)

(Figure B)

PASS ENGE R PAS SE NGER

PASSENGE R PASSENGE R

Insert Clock/Hazard switch assembly from

rear of 99-8235CHG radio housing trim panel

ISO DIN head unit provision

with pocket

1. Mount the pocket to the radio

brackets with the (4) #8 x 3/8”

Phillips screws supplied. (Figure A)

2. Slide the radio into the bracket/

pocket assembly and secure with

screws supplied with the radio.

(Figure B)

3. Secure the radio/pocket assembly

into the sub dash using the

factory hardware.

4. Locate the factory wiring harness

in the dash. Metra recommends

using the proper mating adapter

from Metra or AXXESS. Re-connect

the negative battery terminal and

test the unit for proper operation.

5. Reassemble dash in reverse

order of disassembly using the

99-8235CHG radio trim panel

instead of the factory panel.

Especificaciones del producto

Marca:	Metra
Categoría:	No categorizado
Modelo:	99-8235CHG
Manual de usuario:	Ja
Material de la carcasa:	Plastic, Steel
Indicadores LED:	Ja
Tarjetas de memoria compatibles:	CF, Memory Stick (MS), MicroDrive, MicroSD (TransFlash), MMC, MS Duo, MS PRO, MS PRO Duo, SD, SDHC, SDXC, xD
Conecta y reproduce:	Ja
Software incluido:	Windows XP/Vista/7
Soporta Windows:	Windows 7 Home Basic, Windows 7 Home Basic x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows XP Home, Windows XP Home x64
Interno:	Ja
Tipo de conexión:	USB 3.2 Gen 1 (3.1 Gen 1)
Dimensiones (Ancho x Fondo x Alto):	135 x 101 x 25 mm
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1):	1
Bahías de unidades de soporte:	3.5 "