Metra 99-8267 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-8267 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 2/13/18 INST99-8267
I N S TA L L A T I O N I N S T R U C T I O N S
99-8267
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm Socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1761
Antenna Adapter: L Trim: Not required
S Trim: 40-LX11
Steering Wheel Control Interface: ASWC-1
A B C
Toyota Matrix 2013
D
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the panel from
around the radio. (Figure A)
2. Remove four 10mm bolts and remove
factory radio. (Figure B)
Continue to Kit Assembly
DASH DISASSEMBLY
PASSENGER
SECURIT Y
A/C
0
1
2
3
4
5
(Figure A)
(Figure B)
REV. 2/13/2018 INST99-8267 3
KIT ASSEMBLY
(Figure B)
(Figure A)
(Figure A)
(Figure B)
(Figure C)
ISO DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio
trim panel
using the (4) #8 x 3/8” Phillips
screws provided. (Figure A)
2. Attach the
pocket
to the
radio brackets
using the (4) #8 x 3/8” Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/pocket
assembly and then secure it using the
screws supplied with the radio. (Figure C)
5. Locate the factory wiring harness and
connector in the dash and complete all
necessary connections to the radio. Metra
recommends using the proper mating
adapter from Metra and/or Axxess.
Test the radio for proper operation.
6. Secure the completed assembly into
the dash using the factory screws.
7. Reassemble the dash in reverse order
of disassembly.
ISO DDIN radio provision
1. Attach the
radio brackets
to the
radio
trim panel
using the (4) #8 x 3/8” Phillips
screws provided. (Figure A)
2. Slide the radio into the bracket assembly
and then secure it using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
connector in the dash and complete all
necessary connections to the radio. Metra
recommends using the proper mating
adapter from Metra and/or Axxess.
Test the radio for proper operation.
4. Secure the completed assembly into
the dash using the factory screws.
5. Reassemble the dash in reverse order
of disassembly.

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-8267

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-8267 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales