Metra 99-8723B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-8723B (5 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 09/27/17 INST99-8723B
I N S TA L L A T I O N I N S T R U C T I O N S
99-8723B
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• T-20 Torx driver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Please visit metraonline.com for additional
adapters and accessories.
A B C D
Mercedes-Benz ML 2006-2011
1.800.221.0932
|
MetraOnline.com
2
1. Unsnap and remove climate controls.
2. Remove (2) T-20 Torx screws from the
radio retaining tabs.
3. Push straight down on the retaining tabs
to release the factory radio.
Continue to Kit Assembly
DASH DISASSEMBLY
Please visit Metraonline.com for
Dash Disassembly illustrations.
REV. 9/27/2017 INST99-8723B 3
(Figure B)
(Figure A)
ISO-DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio
trim panel
using (4) #8 x 3/8” Phillips
screws supplied. (Figure A)
2. Attach the
pocket
to the bracket
assembly using the (4) supplied
#8 x 3/8” Phillips screws. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the completed
assembly, and then secure it to the
assembly using screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra
and/or AXXESS. Test the radio for
proper operation.
6. Reassemble the dash in reverse order
of disassembly.
ISO-DDIN radio provision
1. Attach the
radio brackets
to the
radio
trim panel
using (4) #8 x 3/8” Phillips
screws supplied. (Figure A)
2. Slide the radio into the completed
assembly, and then secure it to the
assembly using screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra
and/or AXXESS. Test the radio for
proper operation.
4. Reassemble the dash in reverse order
of disassembly.
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-8723B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-8723B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales