Metra 99-8724B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-8724B (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV.8/27/18 INST99-8724B
I N S TA L L AT I O N I N S T R U C T I O N S
99-8724B
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench • T-20 Torx screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: XSVI-9005-NAV
Antenna Adapter: 40-EU10
Steering Wheel Control Interface: ASWC-1
A B C D
Mercedes-Benz CLK-Class 2005-2009
1.800.221.0932
|
MetraOnline.com
2
1. Unclip the shifter trim panel, then unclip
the shifter boot from the panel. Slide
the shifter boot through the panel, then
unplug and remove the panel. (Figure A)
2. Unclip the ashtray and set to the side.
(Figure B)
3. Remove (2) T-20 Torx screws securing the
bottom of the climate control panel, then
unplug and remove the panel. (Figure C)
(Figure D)
(Figure E)
DASH DISASSEMBLY
(Figure A)
(Figure B)
(Figure C)
4. Open the cup-holder, then unclip,
unplug, and remove the hazard button
panel. (Figure D)
5.
Remove (4) T-20 Torx screws securing the
radio, then unplug and remove the radio.
(Figure E)
Continue to Kit Assembly
REV. 8/27/2018 INST99-8724B 3
(Figure A)
(Figure B)
(Figure C)
KIT ASSEMBLY
(Figure B)
(Figure A)
ISO DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio
trim panel
using (4) #8 x 3/8” Phillips
screws supplied. (Figure A)
2. Attach the
pocket
to the bracket
assembly using the (4) #8 x 3/8” Phillips
screws. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the completed
assembly, and then secure it using
screws supplied with the radio.
(Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
6. Reassemble the dash in reverse order of
disassembly.
ISO DDIN radio provision
1. Attach the
radio brackets
to the
radio
trim panel
using (4) #8 x 3/8” Phillips
screws supplied. (Figure A)
2. Slide the radio into the completed
assembly, and then secure it using
screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
4. Reassemble the dash in reverse order
of disassembly.

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-8724B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-8724B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales