Metra 99-9222 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-9222 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
KIT COMPONENTS
Radio Housing #1
Radio Housing #2
Radio Housing #3
Spacer
TOOLS REQUIRED
Cutting tool
Flat-blade screwdriver
Phillips screwdriver
99-9222
INSTALLATION
INSTRUCTIONS
APPLICATIONS
CAR PAGE
VOLVO
100 Series 1973-75.............................1
200 Series (lower dash) 1975-93.........1
200 Series (upper dash) 1980-93........1
740 Series 1985-92............................ 2
760 Series 1983-88............................ 2
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-07 METRA ELECTRONICS CORPORATION
940 Series 1991-05............................ 2
1
VOLVO 100 Series 1973-75
200 Series (lower dash) 1975-93
1
Locate Radio Housing #1. Skip to the
Installation Instructions for ALL VEHICLES
on Page #3.
2
1
VOLVO 200 Series (upper dash) 1980-93
Locate Radio Housing #2. Skip to the
Installation Instructions for ALL VEHICLES
on Page #2.
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
(1) Phillips screw and (1) plastic twist-lock
screw securing each side panel to the lower
dash console. Remove (2) Phillips screws
from the base of the radio trim bezel and
remove the bezel. Remove (4) screws
securing the factory pocket to the sub-dash
and remove the pocket.
Disconnect the negative battery terminal to
prevent an accidental short circuit. Unclip
the square trim piece located to the left of the
factory radio opening and remove (2) screws
exposed. Open the glove box and remove
(7) screws exposed in the glove box cavity.
Remove the glove box assembly. Remove
(1) screw securing the rear support to the
factory head unit. Slide the head unit out
and disconnect the wiring.
2
2
1
VOLVO 740 Series 1985-92
760 Series 1983-88 940 Series 1991-95
Locate Radio Housing #3. Skip to the
Installation Instructions for ALL VEHICLES
on Page #3.
2
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
(3) screws from the steering column
inspection panel and lower the panel.
Remove the factory radio knobs and shaft
nuts. Insert a flat-blade screwdriver into the
shaft wells and push in on the side springs.
Pull the factory radio out and disconnect the
wiring.
ALL VEHICLES
3a
200 SERIES (UPPER DASH): For 2-Shaft head units, attach the Spacer* to the Radio
Housing. Slide the aftermarket head unit into the kit and secure with shaft nuts. (see Fig. A).
For DIN head units, cut and remove the shaft supports from the Spacer* and Radio Housing.
Slide the DIN cage into the kit and secure by bending the metal locking tabs down. Slide the
aftermarket head unit into the cage until secure. (see Fig. B)
Fig. A
*OPTIONAL
Fig. B
*OPTIONAL

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: 99-9222

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-9222 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales