Metra AX-SUB28SWC2-6V Manual de Usario

Metra No categorizado AX-SUB28SWC2-6V

Lee a continuación 📖 el manual en español para Metra AX-SUB28SWC2-6V (3 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
AX-SUB28SWC2-6V
INSTALL ATION I NSTRUC TION S
REV. 2/14/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
INTERFACE FEATURES
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains the factory AUX-IN jack
• Retains the factory backup camera
• Includes an AX-CAM6V 12-to-6V step-down for the factory camera
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
INTERFACE COMPONENTS
• AX-SUB28SWC2-6V harness • AX-CAM6V
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
AX-SUB28SWC2-6V
Subaru Legacy/Outback (without NAV, with Display radio†)
2013-2014
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights must be
connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while
the vehicle is running.
† Display radio is a color display radio
AX-SUB28SWC2-6V
INSTALL ATION I NSTRUC TION S
REV. 2/14/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
K PNOWLEDGE IS OWER
Enhance your inst allation and fa brication skills by
enrolling in the most recognized a nd spect ed re
mobile elect nics school in our indust ry.ro
Log onto www.insta llerinstit ute.com or call
800-354-6782 for mo informat ion and take st eps re
towa rd a bett er tomorrow.
®
Metra r ecommends MECP
certified technicians
Connections
Connect the wire to chassis ground, and also to the wire from the AX-CAM6V.Black Black
Connect the wire labeled "Camera Power 6V" to the Red Blue/Red wire from the AX-CAM6V.
Connect the wire labeled “ASWC-1 12V Accessory” to accessory power.Red
Connect the wire to the reverse wire from the radio, and also to the Green/Purple Blue/White
wire from the AX CAM6V.
Connect the Yellow RCA jack to the backup camera input from the radio.
If retaining the factory AUX-IN jack, connect the and RCA jacks to the AUX input Red White
from the radio.
The following (2) wires are for aftermarket multimedia/navigation radios that require these wires
:
Connect the wire to the VSS/speed sense wire.Blue/Pink
Connect the Light Green wire to the parking brake wire.
Installation
1.
After the radio has been tested and verified working properly, remove the key from the ignition.
Connect the AX-SUB28SWC2-6V harness to the wiring harness in the vehicle, then to the ASWC-1.
2. Refer to the ASWC-1 instructions for radio connections and programming. Disregard the
harness that comes with the ASWC-1.

Especificaciones del producto

Marca: Metra
Categoría: No categorizado
Modelo: AX-SUB28SWC2-6V

¿Necesitas ayuda?

Si necesitas ayuda con Metra AX-SUB28SWC2-6V haz una pregunta a continuación y otros usuarios te responderán




No categorizado Metra Manuales

No categorizado Manuales

Últimos No categorizado Manuales