Metra Axxess XSVI-9701-NAV Manual de Usario

Metra No categorizado Axxess XSVI-9701-NAV

Lee a continuación 📖 el manual en español para Metra Axxess XSVI-9701-NAV (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

XSVI-9701-NAV

I N S TA L L AT I O N I N S T R U C T I O N S

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell

caps, etc.)

TABLE OF CONTENTS

Connections to be made .......................................2

Installing the XSVI-9701-NAV ................................3

Polaris Slingshot Data Interface 2015-up*

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains the factory USB

• Pre-wired ASWC-1 harness (ASWC-1 sold separately) *

• Retains balance and fade

• Micro “B” USB updatable

• XSVI-9701-NAV interface

• XSVI-9701-NAV harness

*Visit AxxessInterfaces.com for up-to-date vehicle speciﬁc applications.

* For retention of Speed Dependent Volume Control only

CONNECTIONS TO BE MADE

From the XSVI-9701-NAV harness to the aftermarket radio:

• Connect the Black wire to the ground wire.

• Connect the Yellow wire to the battery wire.

• Connect the Red wire to the accessory wire.

• Connect the Gray wire to the right front positive speaker output.

• Connect the Gray/Black wire to the right front negative speaker output.

• Connect the White wire to the left front positive speaker output.

• Connect the White/Black wire to the left front negative speaker output.

• Connect the Green wire to the left rear positive speaker output.

• Connect the Green/Black wire to the left rear negative speaker output.

• Connect the Purple wire to the right rear positive speaker output.

• Connect the Purple/Black wire to the right rear negative output.

The following (3) wires are only for a multimedia/navigation radio that requires these wires.

• Connect the Blue/Pink wire to the VSS/speed sense wire.

• Connect the Green/Purple wire to the reverse wire.

• Connect the Light Green wire to the parking brake wire.

• Connect the USB jack to the aftermarket radio.

12-pin pre-wired ASWC-1 harness:

• This harness is to be used along with the optional ASWC-1 (sold separately) to retain Speed

Dependent Volume Control only. If the ASWC-1 is not being used, disregard this harness. If it

will be used, please refer to the ASWC-1 instructions for radio connections and programming.

Note:

Disregard the harness that comes with the ASWC-1.

REV. 2/6/2018 INSTXSVI-9701-NAV

With the key in the off position:

• Connect the XSVI-9701-NAV harness into the interface, and then to the wiring harness in the

vehicle.

• If installing an ASWC-1 (sold separately), connect it after you test the XSVI-9701-NAV, with the

key in the off position.

• Turn the key to the accessory position and test all functions of the installation for proper

operation, before reassembling the dash.

INSTALLING THE XSVI-9701-NAV

Especificaciones del producto

Marca:	Metra
Categoría:	No categorizado
Modelo:	Axxess XSVI-9701-NAV
Peso.:	- g
Longitud del cable:	2 m
Fuente-de-alimentación:	Kabel
Frecuencia del procesador:	233 MHz
Tecnología de conectividad:	Bedraad
Destinado a:	Kantoor
Soporta Windows:	Ja
Uso recomendado:	PC
Conexión:	USB Type-A
Soporta el sistema operativo Mac:	Ja
El consumo de energía:	70 mA
USB:	Ja
Color de superficie:	Monochromatisch
Resolución de movimiento:	1600 DPI
Espacio mínimo de almacenamiento en disco:	40 MB
RAM mínima:	128 MB
Tecnología de detección de movimiento:	Laser
Desplazarse:	Nee
Número-de-productos-incluidos:	1 stuk(s)
Código del Sistema Armonizado (SA):	84716070
Botones programables del ratón:	Ja