Microchip ATSAMD21J17 Manual de Usario

Lee a continuación 📖 el manual en español para Microchip ATSAMD21J17 (44 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/44
TRAINING MANUAL
Single-slope PWM Implementation using SAM D21 TCC in
a Touch- based Application
AN- 9232
Prerequisites
Hardware Prerequisites
Atmel® SAM D21 Xplained Pro Evaluation Kit
Atmel KitQT1 Xplained Pro
USB Micro Cable (TypeA/ -B) Micro
Software Prerequisites
Atmel Studio 6.2 or higher
Atmel Software Framework 3.1 .0 or higher7
Atmel QTouch® Composer 5.3 or higher
Atmel QTouch Library 5.3 or higher
Documentation Prerequisites
Atmel- - - - - - - -42271 Introduction to QTouch Design Parameters using
SAM- - - - -D21 Xplained Pro_Training Manual_AN 7846 Training Manual
Estimated completion time: 60min.
Introduction
The goal of this hands on is to:-
Create a Touch proje using QTouch Project Builderct
Use QTouch Analyzer to test the project
Implement a PWM signal using the SAM D21 Timer/Counters for Control
peripheral the brightness (TCC) to drive of a LED
Modify the utton LED brightness in relation to the Touch Delta value of a B
sensor by updating the PWM duty cycle
42327 A 07/2014
AN- -9232 Single slope PWM Implementation using SAM D21 TCC in a Touch-based Application: 42327 2014A 07/
Page 442 of
Table of Contents
Prerequisites .....................................................................................1
Introduction .......................................................................................1
Icon Key Identifiers ...........................................................................3
1. Training Module Architecture .....................................................4
1.1 Atmel Studio Extension (.vsix) ............................................................. 4
1.2 Atmel Training Executable (.exe) ......................................................... 4
2. Introduction ................................................................................5
3. Assignment 1: Create a Touch project using QTouch Project
Builder ........................................................................................6
3.1 Project Creation ................................................................................... 6
3.2 Conclusion ......................................................................................... 18
4. Assignment 2: Use QTouch Analyzer to Test the Project ........ 19
4.1 Connect the Kit to QTouch Analyzer ................................................. 19
4.2 Test the Proximity Effect of the QTouch Application ......................... 23
4.3 Conclusion ......................................................................................... 24
5. Assignment 3: Implement a PWM Signal using the SAM D21
Timer/Counters for Control Application Peripheral (TCC) ........ 25
5.1 Introduction to Timer/Counters for Control Application (TCC) ........... 25
5.2 TCC Peripheral Initialization Using ASF Quick Start Guide. ............. 27
5.3 Conclusion ......................................................................................... 34
6. Assignment 4: Use QTouch Button to Control LED Brightness 35
6.1 Reading and using Button Touch Delta Value ................................... 35
6.2 Using PWM to Control LED Brightness ............................................. 37
6.3 Conclusion ......................................................................................... 41
7. Conclusion ............................................................................... 42
8. Revision History ....................................................................... 43
AN- -9232 Single slope PWM Implementation using SAM D21 TCC in a Touch-based Application: 42327 2014A 07/
Page 443 of
Icon Key Identifiers
Delivers contextual information about a specific topic.
Highlights useful tips and techniques.
Highlights objectives to be completed.
Highlights the expected result of an assignment step.
Indicates important information.
Highlights actions to be executed out of the target when
necessary.

Especificaciones del producto

Marca: Microchip
Categoría: No categorizado
Modelo: ATSAMD21J17

¿Necesitas ayuda?

Si necesitas ayuda con Microchip ATSAMD21J17 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Microchip Manuales

No categorizado Manuales

Últimos No categorizado Manuales