Microchip ATSAMDA1E15B Manual de Usario

Microchip No categorizado ATSAMDA1E15B

Lee a continuación 📖 el manual en español para Microchip ATSAMDA1E15B (102 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/102
Atmel QTouch Library
QTouch Library Peripheral Touch Controller
USER GUIDE
Description
Atmel® QTouch® Peripheral Touch Controller (PTC) offers built-in hardware
for capacitive touch measurement on sensors that function as buttons,
sliders, and wheels. The PTC supports both mutual and self-capacitance
measurement without the need for any external component. It offers superb
sensitivity and noise tolerance, as well as self-calibration, and minimizes the
sensitivity tuning effort by the user.
The PTC is intended for autonomously performing capacitive touch sensor
measurements. The external capacitive touch sensor is typically formed on a
PCB, and the sensor electrodes are connected to the analog charge
integrator of the PTC using the device I/O pins. The PTC supports mutual
capacitance sensors organized as capacitive touch matrices in different X-Y
configurations, including Indium Tin Oxide (ITO) sensor grids. In mutual
capacitance mode, the PTC requires one pin per X-line (drive line) and one
pin per Y-line (sense line). In self-capacitance mode, the PTC requires only
one pin with a Y-line driver for each self-capacitance sensor.
Features
Implements low-power, high-sensitivity, environmentally robust
capacitive touch buttons, sliders, and wheels
Supports mutual capacitance and self-capacitance sensing
Up to 32 buttons in self-capacitance mode
Up to 256 buttons in mutual capacitance mode
Supports lumped mode configuration
One pin per electrode - no external components
Load compensating charge sensing
Parasitic capacitance compensation for mutual capacitance mode
Adjustable gain for superior sensitivity
Zero drift over the temperature and VDD range
No need for temperature or VDD compensation
Hardware noise filtering and noise signal de-synchronization for high
conducted immunity
Atmel provided QTouch Library firmware and QTouch Composer tool
Atmel-42195M-Peripheral-Touch-Controller_User Guide-07/2016
Product Support
For assistance related to QTouch capacitive touch sensing software libraries and related issues, contact
your local Atmel sales representative or log on to myAtmel Design Support portal to submit a support
request or access a comprehensive knowledge base.
If you do not have a myAtmel account, please visit http://www.atmel.com/design-support/ to create a new
account by clicking on in the myAtmel menu at the top of the page.Create Account
When logged in, you will be able to access the knowledge base, submit new support cases from the
myAtmel page or review status of your ongoing cases.
Atmel QTouch Library Peripheral Touch Controller [USER GUIDE]
Atmel-42195M-Peripheral-Touch-Controller_User Guide-07/2016
2
Table of Contents
Description.......................................................................................................................1
Features.......................................................................................................................... 1
1. Development Tools ................................................................................................... 5
2. Device Variants Supported........................................................................................ 6
3. Capacitive Touch Technology.................................................................................... 8
3.1. Capacitive Touch Sensors............................................................................................................8
3.2. Capacitance Measurement Methods............................................................................................8
3.3. Self-capacitance Measurement Method.......................................................................................8
3.4. Mutual Capacitance Measurement Method..................................................................................9
3.5. Capacitive Touch Lumped Sensors..............................................................................................9
3.6. Capacitive Touch Low Power Sensor......................................................................................... 11
3.7. PTC and its Benefits...................................................................................................................13
3.8. PTC Block Diagram for Self-capacitance and Mutual Capacitance Method.............................. 13
3.9. Design Approach with PTC........................................................................................................ 15
3.10. Capacitive Touch Development Cycle........................................................................................16
4. Touch Sensor Debug and Status Information.......................................................... 17
4.1. Signal..........................................................................................................................................17
4.2. Reference...................................................................................................................................17
4.3. Delta........................................................................................................................................... 18
4.4. Touch Status & Slider/Wheel Position........................................................................................ 19
5. QTouch Library........................................................................................................ 20
5.1. Overview.....................................................................................................................................20
5.2. Library Parameters.....................................................................................................................21
5.3. Moisture Tolerance..................................................................................................................... 42
5.4. Reading Sensor States...............................................................................................................44
5.5. Application Flow......................................................................................................................... 44
5.6. API Sequence.............................................................................................................................46
5.7. State Machine.............................................................................................................................47
5.8. Operation Modes........................................................................................................................50
5.9. Touch Library API Error.............................................................................................................. 52
6. Tuning for Noise Performance.................................................................................54
6.1. Noise Sources............................................................................................................................ 54
6.2. Noise Counter Measures............................................................................................................54
7. Application Design................................................................................................... 60
7.1. Touch Library and Associated Files............................................................................................60
7.2. Code and Data Memory Considerations.................................................................................... 60
8. Example Applications.............................................................................................. 63

Especificaciones del producto

Marca: Microchip
Categoría: No categorizado
Modelo: ATSAMDA1E15B

¿Necesitas ayuda?

Si necesitas ayuda con Microchip ATSAMDA1E15B haz una pregunta a continuación y otros usuarios te responderán




No categorizado Microchip Manuales

No categorizado Manuales

Últimos No categorizado Manuales