Microchip AVR64DD14 Manual de Usario

Microchip No categorizado AVR64DD14

Lee a continuación 📖 el manual en español para Microchip AVR64DD14 (22 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/22

TB3234

Internal High-Frequency Oscillator Calibration Using the

Auto-Tune Feature

Introduction

Author: Ioan Pop, Microchip Technology Inc.

The purpose of this document is to provide more details on the internal high-frequency oscillator (OSCHF) auto-tune

feature of the AVR® DA MCU (AVR DA) family and how to activate it. The auto-tune feature allows OSCHF to adjust

its frequency, comparing it to an external 32.768 kHz crystal oscillator to better match the desired value.

This document describes four use cases in which the internal high-frequency oscillator will be used to drive the main

clock, each use case containing two scenarios. For the first three use cases the two scenarios are: with auto-tune

feature activated and deactivated. The purpose of the last use case is to check the auto-tune feature against an

incorrect tuning value provided by the user, therefore the two scenarios for the last use case are: incorrect tune value

setting and auto-tune enabled. The switch between the two scenarios is made using the PC7 pin (the on-board SW0

button of the AVR128DA48 Curiosity Nano board). Additionally, the main clock will be output to the CLKOUT pin

(PA7) in order to showcase the auto-tune feature improvement on the OSCHF output frequency precision. The use

cases described in this technical brief are:

•Configure OSCHF to run at 1 MHz and activate/deactivate the auto-tune feature:

The purpose of this use case is to configure the OSCHF to run at 1 MHz and drive the main clock, and enable

frequency output on the CLKOUT pin. Two frequency measurements on the CLKOUT pin will be made using an

oscilloscope - with auto-tune feature activated and deactivated.

•Configure OSCHF to run at 4 MHz and activate/deactivate the auto-tune feature:

The purpose of this use case is to configure the OSCHF to run at 4 MHz and drive the main clock, and enable

frequency output on the CLKOUT pin. Two frequency measurements on the CLKOUT pin will be made using an

oscilloscope - with auto-tune feature activated and deactivated.

•Configure OSCHF to run at 24 MHz and activate/deactivate the auto-tune feature:

The purpose of this use case is to configure the OSCHF to run at 24 MHz and drive the main clock, and enable

frequency output on the CLKOUT pin. Two frequency measurements on the CLKOUT pin will be made using an

oscilloscope - with auto-tune feature activated and deactivated.

•Configure OSCHF to run at 4 MHz with incorrect tuning value:

The purpose of this use case is to configure the OSCHF to run at 4 MHz and drive the main clock, and enable

frequency output on the CLKOUT pin. An error injection will be made to the tune register to check if the auto-

tune mechanism will be able to correct it. Two frequency measurements on the CLKOUT pin will be made using

an oscilloscope - with the incorrect frequency tune input and with auto-tune feature activated

Note: The AVR128DA48 Curiosity Nano was used for the tests performed and described in this document.

Table of Contents

Introduction ....................................................................................................................................................1

1. Relevant Devices.................................................................................................................................... 3

1.1. AVR® DA Family Overview.......................................................................................................... 3

2. Overview................................................................................................................................................. 4

3. Activating and Testing the Auto-Tune Feature........................................................................................ 5

4. Configure OSCHF to Run at 1 MHz and Activate/Deactivate the Auto-Tune Feature............................ 7

5. Configure OSCHF to Run at 4 MHz and Activate/Deactivate the Auto-Tune Feature.......................... 10

6. Configure OSCHF to Run at 24 MHz and Activate/Deactivate the Auto-Tune Feature........................ 12

7. Configure OSCHF to Run at 4 MHz with Incorrect Tuning Value..........................................................14

8. Conclusion............................................................................................................................................ 16

9. References............................................................................................................................................17

10. Appendix............................................................................................................................................... 18

11. Revision History.................................................................................................................................... 19

The Microchip Website.................................................................................................................................20

Product Change Notification Service............................................................................................................20

Customer Support........................................................................................................................................ 20

Microchip Devices Code Protection Feature................................................................................................ 20

Legal Notice................................................................................................................................................. 20

Trademarks.................................................................................................................................................. 21

Quality Management System....................................................................................................................... 21

Worldwide Sales and Service.......................................................................................................................22

TB3234

1. Relevant Devices

This chapter lists the relevant devices for this document.

1.1 AVR® DA Family Overview

The figure below shows the AVR® DA devices, laying out pin count variants and memory sizes:

• Vertical migration is possible without code modification, as these devices are fully pin and feature compatible.

• Horizontal migration to the left reduces the pin count and therefore, the available features.

Figure 1-1. AVR® DA Family Overview

128 KB

64 KB

32 KB

Pins

Flash

AVR64DA28

AVR128DA28

AVR32DA28

AVR128DA32 AVR128DA48 AVR128DA64

AVR64DA32 AVR64DA48 AVR64DA64

AVR32DA32 AVR32DA48

Devices with different Flash memory size typically also have different SRAM.

TB3234

Relevant Devices

Especificaciones del producto

Marca:	Microchip
Categoría:	No categorizado
Modelo:	AVR64DD14
Colocación del dispositivo:	Ingebouwd
Color del producto:	Stainless steel, Transparent
Bisagras de puerta:	Links
Peso.:	53000 g
Consumo-anual-de-energía:	219 kWu
Iluminación interior:	Ja
Capacidad bruta total:	127 l
Número de estantes:	3 schappen
Capacidad de la botella:	38 fles(sen)
Rango de temperatura (zona 1):	5 - 20 °C