Microchip USB2504 Manual de Usario

Microchip No categorizado USB2504

Lee a continuación 📖 el manual en español para Microchip USB2504 (3 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

SMSC EVB-USB2504 Revision A1 (06-26-07)

The information contained herein is proprietary to SMSC and shall be used solely in accordance with the agreement pursuant to which

it is provided. Although the information is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the

right to make changes to this document and to specifications and product descriptions at any time without notice. Neither the provision

of this information nor the sale of the described semiconductor devices conveys any licenses under any patent rights or other intellectual

property rights of SMSC or others unless specifically specified otherwise. The product may contain design defects or errors known as

anomalies, including but not necessarily limited to any which may be identified in this document, which may cause the product to deviate

from published specifications. SMSC products are not designed, intended, authorized or warranted for use in any life support or other

application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without

prior written approval of an officer of SMSC will be fully at the risk of the customer. SMSC is a registered trademark of Standard

Microsystems Corporation ("SMSC").

SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE,

AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE

LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA,

PROFITS, SAVINGS OR REV-ENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT;

NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY

OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

EVB-USB2504 Evaluation Board

Revision A1 (06-26-07) SMSC EVB-USB2504

1 Overview

1.1 Features

Operates from a single voltage (+5.0V, regulated) wall wart external power supply

Onboard +3.3V Regulator

Self-powered operation

Serial EEPROM for configuration information mounted in a socket

Full set of green and amber LED indicators

Individual port over-current sense and power switching

Multi-TT enabled

High-speed/Full-speed capable

100mS down stream port power on time

1mA VBUS current consumption

1.2 General Description

The primary purpose of this board is to demonstrate a full-featured HUB configuration for the SMSC

USB2504 4-port HUB. This does not represent a minimal cost design. The EEPROM allows for

modifications to the the base configuration - for example one more down stream ports can be disabled

or configured as non-removable for compound device application. The DID, PID or DID information

can be changed for HUB.

A windows utility E2PROMAPP is included in the package to allow modifications of the base

configuration EEPROM. The bin file evb-usb2504_02.bin contains the base configuration. A screen

shot from the application is shown in figure 1. After changes has been selected click the button “Create

EEPROM File”. Note that if the output file name is the same as the input file name it will be overwritten

with the new values. The output file name can be changed before creating a new bin file. The bin file

format is compatible with most EEPROM programmers.

EVB-USB2504 Evaluation Board

SMSC EVB-USB2504 Revision A1 (06-26-07)

Figure 1.1 E2PROMAPP EEPROM Configuration Utility.

Especificaciones del producto

Marca:	Microchip
Categoría:	No categorizado
Modelo:	USB2504
Peso.:	2000 g
Ancho:	305 mm
Profundidad:	277 mm
Altura:	108 mm
Estándares wifi:	Wi-Fi 6E (802.11ax)
red LAN:	Ja
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	2
Estándar Wi-Fi:	Wi-Fi 6E (802.11ax)
Zócalo del procesador:	LGA 1700
Fabricante del procesador:	Intel
Memoria interna máxima:	128 GB
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo C:	1
Canales de salida de audio:	7.1 kanalen
Tipo de interfaz Ethernet:	2.5 Gigabit Ethernet, 10 Gigabit Ethernet
placa base con chipset:	Intel Z690
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo A:	7
Tipo de ranura de memoria:	DIMM
Salida S/PDIF:	Ja
Tipo de enfriamiento:	Vloeistof
Canal de memoria:	Dubbelkanaals
Ranuras PCI Express x1 (Gen 3.x):	1
Interfaces de unidad de almacenamiento compatibles:	M.2, SATA III
Cantidad de puertos Thunderbolt:	1
Componente para:	PC
Número de conectores SATA III:	6
No ECC:	Ja
Procesadores compatibles:	Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium Gold
Tipos de memoria soportados:	DDR5-SDRAM
Wifi.:	Ja
Código del Sistema Armonizado (SA):	84733020
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	Verlengd ATX
Número de ranuras de memoria:	4
Velocidades de reloj de memoria admitidas:	4800,5000,5200,5400,5600,5800,6000,6200,6400 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	512 Mbit
Conexión para refrigerador de CPU:	Ja
Conexiones para ventiladores de caja:	2
Conector de alimentación ATX (24 pines):	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Memoria sin búfer:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	2
Conector de alimentación EPS (8 pines):	Ja
Borrar perilla CMOS:	Ja
Número de ranuras M.2 (M):	5
Número de puertos USB 3.2 Gen 2.2 Tipo-C:	1
Ranuras PCI Express x16 (Gen. 5.x):	2