Middle Atlantic Products RK-GD20 Manual de Usario

Lee a continuación 📖 el manual en español para Middle Atlantic Products RK-GD20 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
I-00189 Rev D
Thank you for purchasing the RK-GDXX Glass Door. Please read these instructions thoroughly
before installing this product.
PRODUCT FEATURES
THANK YOU
- Locking door provides security
- Smoked, tempered glass provides a clean look
Page 2
# 2 Phillips Head Screwdriver or Power Driver with Bit
Door
(QTY -1)
BEFORE BEGINNING INSTALLATION
1) Move the rackrail to the recessed set of enclosure mounting holes using existing wood screws.
NOTE: When moving front rackrail to setback position, mount rail to recessed pilot holes on opposite
end of side panel. This hides the original mounting holes from view.
RACKRAIL
WOOD
SCREW
HARDWARE/ITEMS SUPPLIED
TOOLS REQUIRED
Self-Adhesive Hinge Plate
Hinge
Pivot Bushing (.347” O.D.)
Pivot Bushing (.313 O.D.)
5/8" Pan Head Wood Screw
Stop Pin
Locking Bracket
Magnet
QTY DESCRIPTION
2
2
2
2
2
2
1
1
Page 3
1) Determine desired hinge side and install
pivot bushings in top and bottom of rack.
(FIGURE A)
NOTE: Two bushing sizes are provided.
Use appropriate size bushing for your rack.
2) Remove adhesive backing and install both
hinge plates on inside of glass door. (FIGURE B)
LOCKING
BRACKET
WOOD SCREWS
(2) PAN HEAD
MAGNET
INSTALLATION
TOP HINGE
FIGURE A
HINGE
PLATES (2)
FIGURE C FIGURE D
FIGURE E
PIVOT
BUSHING
(TOP)
HINGE
PIVOT
BUSHING
(BOTTOM)
HINGE
PLATE
BOTTOM
HINGE
SCREWS (2)
FIGURE B
3) Slide bottom hinge against door and adjust so that hinge is flush with edge of door.
(FIGURE C, FIGURE D)
4) Tighten (2) screws to secure bottom hinge to hinge plate. (FIGURE C)
NOTE: Do not over tighten.
5) Pivot door into bottom pivot bushing. (FIGURE C)
6) Insert upper hinge into top pivot bushing and hold hinge in place with hand.
(FIGURE A)
7) Slide door into top hinge and adjust position of door, so that
hinge is flush with edge of door. (FIGURE D)
8) Tighten (2) screws to secure upper hinge to hinge plate.
: Do not over tighten.NOTE
9) If neccessary, adjust hinges to balance door opening gaps.
10) Attach locking bracket opposite hinge side with (2) wood
screws provided. Install magnet as shown. (FIGURE E)
PIVOT
BUSHING
(BOTTOM)
FLUSH
EDGE

Especificaciones del producto

Marca: Middle Atlantic Products
Categoría: No categorizado
Modelo: RK-GD20

¿Necesitas ayuda?

Si necesitas ayuda con Middle Atlantic Products RK-GD20 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Middle Atlantic Products Manuales

No categorizado Manuales

Últimos No categorizado Manuales