Miele WCR870 WPS PWash2.0&TDos XL&WiFi Manual de Usario

Miele lavadora WCR870 WPS PWash2.0&TDos XL&WiFi

Lee a continuación 📖 el manual en español para Miele WCR870 WPS PWash2.0&TDos XL&WiFi (4 páginas) en la categoría lavadora. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

WCR 870 WPS en - AU, NZ M.-Nr. 11 016 600/00

Before the first use Operating the washing machine Preparing the laundry Selecting a programme Adding detergent Starting the programme Extras

OPERATING THE WASHING MACHINE

PREPARING THE LAUNDRY/SELECTING A PROGRAMME

ADDING DETERGENT/STARTING THE PROGRAMME

3 5

ɔDamage resulting from incorrect

installation and connection.

Installing and connecting the washing

machine incorrectly will cause serious

damage.

Please read the separate operating

instructions supplied with the appliance.

ɔDamage resulting from failure to

remove the transit bars.

Failure to remove the transit bars can

result in damage to the washing machine

and to adjacent cabinetry or appliances.

Please read the separate operating

instructions supplied with the appliance.

Switching on the washing machine

ĺPress the button.

The welcome screen will light up.

The display will guide you through the initial

commissioning process, which is divided

into 6steps.

For further information, please refer to the

separate operating instructions.

Touch display and sensor controls

The and Start/Stop sensors and the 

sensors in the display react to fingertip

contact.

The Touch display can be scratched by

pointed or sharp objects, e.g. pens.

Only touch the display with your fingertips.

1  sensor

Takes you back a level in a menu.

2 Touch display

3 Start/Stop sensor

Touching the Start/Stop sensor starts the selected programme or cancels a programme that has already been started. The sensor flashes

slowly as soon as it is possible for a programme to be started and then lights up constantly after the programme has started.

4 Optical interface

For service technicians.

5  button

For switching the washing machine on and off. To save energy, the washing machine will switch off automatically. This occurs 15minutes

after the end of the programme/Anti-crease phase, or after being switched on if no further selection is made.

Main menu

After switching on the washing machine,

the main menu will appear in the display.

You access all the important sub-menus

from the main menu.

Touch the sensor at any time to return to 

the main menu. Values set previously are

not saved.

 Programmes

For selecting the wash programme.

 Favourite programmes

You can save up to 12 of your own

customised wash programmes.

 MobileControl

With MobileControl you can operate your

washing machine remotely with the

Miele@mobile App.

 Washing assistant

The Washing assistant guides you step by

step so that you can select the optimum

wash programme for your laundry.

 Maintenance

Maintenance options for the TwinDos

system and the programme Clean machine

are located in the Maintenance menu (see

"Cleaning and care").

 Settings

You can alter the washing machine's

electronics to suit changing requirements in

the Settings menu.

Operating the touch display

Scrolling

You can scroll to the right or the left by

swiping your finger across the screen.

The orange bar under the pictures shows

that there are further options to choose

from.

Selecting

Touch an option in the menu to select it.

If there are multiple options, the selected

option will be highlighted in orange.

Pull-down menu

Touch the top edge of the screen in the

middle and drag down with your finger.

1. Preparing the laundry

ĺEmpty all pockets.

ɔForeign objects (e.g. nails,

coins, paper clips, etc.) can

cause damage to garments and

components in the machine.

ĺSort the laundry by colour and by care label. Most

garments have a textile care label in the collar or side

seam.

ĺPre-treat stains and badly soiled areas (see the booklet

"Miele's guide to laundry care").

2. Selecting a programme

ĺTouch the sensor.Programme

ĺScroll to the right of the display until the programme you

want appears.

ĺTouch the sensor for that programme.

The display will change to show the menu.Overview

There are 3 different ways of selecting a programme.

1. Favourites

2. Washing assistant

3. MobileControl

 11:02









2:39

2:59

1:59

1:09h

h h

Cottons

Cottons Delicates

Minimum iron

Programmes

Help

 11:02

40 °C 1600



2:39

Cottons

Overview

Temperature Spin speed

TwinDos Extras

not selectedColour

 Timer  Save





rpm

1 Detergent dispenser drawer

2 Control panel

3 Access to drain filter, drain pump

and emergency release

4 Door

5 Access panel for TwinDos

containers

3. Selecting programme settings

Selecting the temperature

ĺTouch the Temperature sensor and select the

temperature you want.

Selecting a spin speed

ĺTouch the sensor and select the spin speed Spin speed

you want.

Activating TwinDos

TwinDos dispensing is automatically activated for all

programmes in which dispensing is possible.

1. Switch TwinDos on or off

ĺTouch the TwinDos sensor and select Off or .On

2. Select the detergent

When using Miele's 2-phase system you must set the

colour of the laundry.

If you are using a different type of detergent, this must be

selected.

3. Select the degree of soiling.

ĺSelect Light, Normal or Heavy and confirm your selection

with the sensor.OK

Selecting Extras

ĺTouch the sensor.Extras

ĺSelect one or more Extras and confirm your selection

with the sensor.OK

Activating CapDosing

ĺTouch the CapDosing sensor.

ĺSelect the type of capsule you want.

Stains

ĺTouch the sensor.Stains

ĺSelect the type of stains in your load from the list and

confirm your selection with the sensor.OK

 Timer

You can use the Timer to set the finish time or the start

time for a wash programme.

4. Loading the washing machine

Opening the door

ĺTake hold of the

door and pull it

open.

ĺUnfold the

laundry and load

loosely in the

drum.

The maximum load for the programme

selected will appear in the pull-down menu.

Closing the door

ĺMake sure that

no items are

caught between

the door and the

seal.

ĺShut the door

with a gentle

swing.

5. Adding detergent

There are several options for adding

detergent.

TwinDos

TwinDos has to be activated as described

in "Before using for the first time".

Activating TwinDos dispensing

TwinDos dispensing is automatically

activated for all programmes in which

dispensing is possible.

Changing TwinDos dispensing

You can change the suggested colour

composition of the laundry.

ĺTouch the TwinDossensor and select the

colour composition of your laundry.

Deactivating TwinDos dispensing

ĺTouch the TwinDos sensor and then touch

the sensor.Off

Adding detergent

Any detergent suitable for automatic front

loading washing machines can be used

with this appliance. Add detergent in

accordance with the value in the pull-down

dosage display.

Ensure that TwinDos dispensing is

deactivated.

ĺPull out the

detergent drawer

and add

detergent to the

compartments.

Detergent for the pre-wash

Detergent for the main wash,

including Soak if selected

 /  Fabric softener, liquid starch or

capsules

Using detergent tablets or pods

Always put detergent tablets or pods

directly in the drum with the laundry.

They cannot be added via the detergent

dispenser drawer.

Using liquid detergent with a pre-wash

Liquid detergent cannot be used for the

main wash if the pre-wash has been

selected.

Use TwinDos dispensing if you are

activating the pre-wash.

CapDosing

If you selected when setting the CapDosing

programme, detergent will be dispensed via

the capsule for this wash programme.

Only one capsule can be selected per wash

programme.

Three different types of capsule are

available:

Fabric care (e.g. fabric softener)

Additives (e.g. detergent enhancers)

Detergent

Each capsule contains the correct amount

for one wash cycle.

Capsules are available to order from Miele

or from the Miele online shop.

ɔCapsules pose a health risk.

The ingredients of capsules can be

hazardous to health if they are swallowed

or come into contact with skin.

Keep capsules out of the reach of

children.

6. Starting the programme –

end of the programme

Starting the programme

ĺTouch the flashing sensor.Start/Stop

The door will lock ( appears in the display) 

and the programme will start.

At the end of the programme

The door is still locked during the Anti-

crease phase and the following will appear

alternately in the display:

 Finish/Anti-crease and

Unlock with "Start/Stop"

ĺTouch the sensor. The door Start/Stop

will be unlocked.

The door unlocks automatically at the end

of the Anti-crease phase.

ĺPull open the door.

ĺRemove the laundry.

Check that all items have been removed

from the drum.

ĺCheck the folds

in the door seal

for any small

articles, e.g.

buttons, which

might be lodged

there.

ĺSwitch the washing machine off with the

 button.

ĺIf applicable, remove the used capsule

from the detergent dispenser drawer.

Close the door. Otherwise there is

a danger of objects being placed

inadvertently in the drum. If these remain

unnoticed and were washed in the next

load, they could damage the laundry. An

open door is also a danger to pets and

children.

Extras

You can use the Extras sensor to

augment the wash programmes.

Quick

The programme duration is reduced.

Mechanical action and energy usage

are increased.

Eco

The Eco Extra helps to save energy.

The wash temperature is reduced and

the wash duration is increased in return.

The wash programme continues to

provide excellent results.

Water plus

The water level in the wash and rinse

stages is increased. You can select by

how much the water level is increased

(see "Settings - Water plus level").

Extra rinse

An additional rinse cycle can be carried

out to give a better rinse result.

SingleWash

For efficiently washing a very small load

(<1kg) in a normal wash programme.

The wash duration is reduced.

Please note the following advice:

–Use liquid detergent

–Reduce the dosage to a maximum of

50% of the amount quoted for a ½

load

Pre-ironing

In order to reduce creasing, the laundry

undergoes a smoothing process at the

end of the programme. Reducing the

maximum load by 50% will give a better

result. Follow the instructions in the

display. Small loads give a better result.

The garments must be suitable for

drying in a tumble dryer and  

suitable for ironing  .

Pre-wash

For laundry with large amounts of dirt, e.g.

dust and sand.

Soak

For heavily soiled and stained items with

protein stains.

A duration of between 30minutes

and 6hours can be chosen for the

soak process. See "Settings" for more

information.

The factory default setting is 30minutes.

Intensive

For hard-wearing laundry that is very

heavily soiled. Cleaning efficiency

is increased through more intense

mechanical action and the application of

more heat energy.

AllergoWash

This option should be used where high

standards of hygiene are required. More

energy is used to lengthen temperature

holding times and more water is used to

increase rinsing efficiency. The items must

be suitable for drying in a tumble dryer 

  . and suitable for ironing

Extra gentle

Drum rotation and wash duration are

reduced. Lightly soiled fabrics are washed

more gently.

Extra quiet

This option reduces noise levels during

the wash programme. Use this if you

want to wash during quiet periods (for

instance, when children are sleeping). The

final spin is automatically reduced to 

(Rinse hold). The programme duration is

increased.

Rinse hold

The laundry is not spun after the final rinse

and remains in the rinse water. This helps

prevent creasing if the laundry is not going

to be removed from the drum immediately

after the end of the programme.

en - AU, NZ M.-Nr. 11 016 600

Cleaning and careProgramme chart Detergent Problem solving guide

PROBLEM SOLVING GUIDE

CLEANING AND CARE

PROGRAMME CHART

Quick Start Guide

Washing machine

These short instructions are not a substitute for the operating instructions supplied with

the appliance. Please read the operating instructions supplied with your washing machine

before using it for the first time and take note of the Warning and Safety instructions, as

well as the full descriptions on how to use your appliance.

Miele recommended detergents

Programmes

Miele

UltraPhase

1/2

Miele

Cap 

Miele

Cap 

Miele

Cap 

Cottons – 

Minimum iron – 

Delicates   –

QuickPowerWash – – –

Automatic plus – 

Woollens –– –

Silks –– –

Express 20 – –

Shirts – 

Denim – –

Dark garments – –

Sportswear –– –

Trainers – – 

Down Items – – –

Down duvets –– –

Pillows – – –

Curtains – – 

First wash – –

Separate rinse –– –

 = recommended; – = not recommended

   = Sport; = Down items; = WoolCare; = Fabric Softener ; = Booster 

Cleaning the TwinDos system

ɔDamage resulting from dried washing

detergent.

If the system has not been used for a

long time (more than two months), the

detergent in the hoses can become

viscous or dry out. The hoses can

become blocked and would then need to

be cleaned by a service technician.

Clean the TwinDos system.

To clean the system, a refillable TwinDos

container is required (sold separately),

available online at shop.miele.com.

Cleaning the detergent dispenser

drawer

Washing at low temperatures and the use

of liquid detergent can lead to a build-up

of mould and bacteria in the detergent

dispenser drawer.

ĺClean the entire drawer at regular

intervals for hygiene reasons, even if you

are using the TwinDos system exclusively.

ĺPull out the

detergent

dispenser drawer

until a resistance

is felt.

ĺPress down the release button and, at

the same time, pull the drawer right out of

the machine.

ĺClean the detergent dispenser drawer

with warm water.

Cleaning the siphon and the fabric

softener channel

ĺPull the siphon

out of the

compartment

and clean it

under warm

running water.

ĺClean the siphon tube in the same way.

ĺRefit the siphon.

ĺClean the fabric

softener channel

using a brush

and warm water.

ɔLiquid starch can cause the siphon

to become clogged. Make sure that

you clean the siphon and siphon tube

particularly thoroughly after using liquid

starch a few times.

Cleaning the detergent dispenser

drawer housing

ĺUse a bottle brush to remove detergent

residues and limescale from the jets

inside the detergent dispenser drawer

housing.

Some of the messages in the display are more than one line long. Touch the or sensor  

to read them in full.

Message Possible cause and remedy

The display remains

dark and the Start/Stop

sensor indicator light

does not come on.

There is no power to the machine.

ĺCheck whether the mains plug is plugged in and switched

on.

ĺCheck whether the circuit breaker has tripped.

The washing machine has switched off automatically to save

energy.

ĺSwitch it back on with the button.

Door will not lock. Call

Miele.

The door is not closed properly. The door lock could not

engage.

ĺClose the door again.

ĺStart the programme again. If the fault message appears

again, contact Miele.

Water drainage fault.

Clean the drain filter and

the pump. Check the

drain hose.

The water outlet is blocked or restricted. The drain hose has

been fixed too high.

ĺClean the drain filter and the drain pump.

ĺCheck whether the maximum delivery head of 1m has been

exceeded.

Water intake fault. Turn

on the tap.

The water inlet is blocked or restricted.

ĺCheck whether the tap is turned on properly.

ĺCheck whether the inlet hose is kinked.

ĺCheck whether there is sufficient water pressure.

The filter in the water inlet is blocked.

ĺClean the filter (see the operating instructions).

 Waterproof system

activated. Turn off the

tap. Call Miele.

The water protection system has reacted.

ĺTurn off the tap.

ĺCall Miele.

  Fault F

If restart fails, call Miele.

There is a fault.

ĺDisconnect the washing machine from the mains electricity

supply, either by switching it off at the wall socket and

withdrawing the plug, or by disconnecting it at the circuit

breaker.

ĺWait before reconnecting the washing at least 2 minutes

machine to the mains electricity supply.

ĺThen switch the washing machine on again.

ĺRestart the programme.

If the fault message appears again, contact Miele.

The door lock is

jammed. Call Miele.

The door lock is jammed.

ĺCall Miele.

Message Possible cause and remedy

Check detergent Excessive foam has built up during washing.

ĺCheck the amount of detergent dispensed.

ĺWith automatic detergent dispensing, check the dosage

amount set.

ĺObserve the instructions on the detergent packaging and

the degree of soiling of the laundry.

ĺIf necessary, reduce the dosage amount by increments of

10%.

 Hygiene info: Select

"Maintenance" and

start the "Clean

machine" programme.

A programme using a temperature above 60°C has not been

run for a long time.

ĺIn order to prevent bacteria and unpleasant odours building

up in the machine, run the programme using Clean machine

Miele IntenseClean or powder detergent.

  Align the washing

machine. Laundry not

properly spun.

The Extra which runs at the end of the programme Pre-ironing

could not be carried out properly.

ĺCheck whether the washing machine is aligned correctly

as described in "Installation and connection – Levelling the

machine".

ĺCheck whether the maximum delivery head of 1m has been

exceeded.

If the fault message appears again, contact Miele. The

washing machine can still be used, however without the Pre-

ironing Extra.

Only a few more washes

possible before a new

cartridge is needed for

compartment .

The detergent in the cartridge is running low. There are

between 4and 8wash cycles remaining.

ĺOrder a new cartridge.

Use "TwinDos" or

carry out "TwinDos"

Maintenance in the

"Maintenance" menu.

See the operating

instruction manual for

more information.

TwinDos or automatic dispensing via compartment and⁄or 

 has not been used for a long time.

ĺUse TwinDos for one of your next loads.

ĺCarry out the TwinDos maintenance programme as

described in "Cleaning and care - TwinDos maintenance".

"TwinDos" Maintenance

for compartment 

must be started in the

"Maintenance" menu.

See the operating

instruction manual for

more information.

TwinDos or automatic dispensing via compartment and⁄

or has not been used for a long time. It is possible that 

detergent has dried inside the hoses.

ĺCarry out the TwinDos maintenance programme

immediately as described in "Cleaning and care - TwinDos

maintenance".

The messages will appear at the end of the programme and when the washing machine is

switched on and need to be confirmed with the sensor.OK

Programme Load (inkg) Temperature Items Extras

Cottons

Cottons 

9.0 Cold to 90°C Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,

underwear, T-shirts etc.





Minimum iron 4.0 Cold to 60°C Synthetic, mixed fibre and easy care cotton. 



Delicates 3.0 Cold to 60°C Delicate garments made from synthetic fibre, mixed fibre, rayon and

viscose.





QuickPowerWash 5.0 40°C – 60°C Moderately soiled garments which are also suitable for washing in the

Cottons programme.



Automatic plus 6.0 Cold to 40°C Mixed loads of garments sorted according to colour which are suitable

for the and programmes.Cottons Minimum iron





Woollens 2.0 Cold to 40°C Machine-washable or hand-washable wool or wool blend fabric. If the

care label does not specify a temperature, wash using the cold setting.



Silks 1.0 Cold to 30°C Silks and other hand-washable fabrics with no wool content, e.g. satin,

lace and silk.



Express 20 3.5 Cold to 40°C Cotton garments that have hardly been worn or are only very lightly

soiled.



Shirts 1.0 ⁄ 2.0 Cold to 60°C Shirts and blouses made of cotton and mixed fibre.

If the preset Pre-ironingoption is switched off, the maximum load

capacity is increased to 2.0kg.





Denim 3.0 Cold to 60°C Items made of denim. 



Dark garments 3.0 Cold to 60°C Black and dark items made of cotton or mixed fibres. 



Sportswear 3.0 Cold to 60°C Sportswear such as jersey shirts and leggings, and microfibre and

fleece garments.





Trainers 2 pairs Cold to 40°C Sport shoes only (not leather shoes). 

Outerwear 2.5 Cold to 40°C Performance outerwear (e.g. jackets and trousers) made from

membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®

etc.





Proofing 2.5 40°C Treating microfibre fabric, skiwear and table linen made from mainly

synthetic fibres to provide a water and dirt resistant finish.



Down Items 2.0 Cold to 60°C Jackets, sleeping bags, pillows and other down-filled items. 



Down duvets 2.5 Cold to 60°C Quilts, duvets and pillows with feather or down filling. 



Pillows 2.0 Cold to 60°C Synthetic filled washable pillows. 



Cottons hygiene 9.0 60°C to 90°C Cotton or linen fabrics with direct skin contact or for which special

hygiene requirements apply.





Curtains 2.0 Cold to 40°C Curtains, including net curtains, specified as machine-washable by the

manufacturer.





First wash 2.0 Cold to 40°C New items made of cotton, towelling and polyester fabric. 

Separate rinse 8.0 – For rinsing items washed by hand. 

Starch 8.0 – Starching table cloths, serviettes and workwear.



Drain/Spin 8.0 – Drain only: Select for the spin speed.0 rpm

Clean machine No load 85°C With frequent washing at low temperatures there is a danger of a

build-up of bacteria in the washing machine.

Cleaning the washing machine will significantly reduce bacteria, mould,

and biofilm, and prevent the build-up of unpleasant odours.

    = Quick; = Eco; = Water plus; = Extra rinse; = SingleWash; = Pre-ironing; = Pre-wash; = Soak; = Intensive; = AllergoWash;      

  = Extra gentle; = Extra quiet; = Rinse hold

Especificaciones del producto

Marca:	Miele
Categoría:	lavadora
Modelo:	WCR870 WPS PWash2.0&TDos XL&WiFi
Color del producto:	Zwart
Consumo-anual-de-energía:	34 kWu
Peso del embalaje:	4400 g
Ancho del embalaje:	635 mm
Empaquetadura en profundidad:	408 mm
Altura del embalaje:	111 mm
Clase de eficiencia energética (antigua):	A
Tipo de embalaje:	Doos
Ajustable en altura:	Nee
Diagonal de la pantalla:	24 "
Resolución:	1920 x 1080 Pixels
Pantalla táctil:	Nee
Relación de aspecto original:	16:9
Ángulo de visión, horizontal:	170 °
Ángulo de visión, vertical:	160 °
Cables suministrados:	HDMI
Forma de pantalla:	Flat
Relación de contraste típica:	1000:1
Guía de inicio rápido:	Ja
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Puerto DVI:	Nee
Opción de montaje de bloqueo de cable:	Nee
Altavoces incorporados:	Nee
Consumo de energía (en espera):	- W
Consumo de energía (máx.):	30 W
Pantalla, número de colores.:	16.78 miljoen kleuren
Consumo de energía (cuando está apagado):	0.3 W
Velocidad máxima de actualización:	60 Hz
tipo HD:	Full HD
hdmi:	Ja
Tecnología de visualización:	LED
Tiempo de respuesta:	1 ms
Resoluciones de gráficos compatibles:	1920 x 1080 (HD 1080)
Imagen en imagen:	Nee
Brillo (típico):	250 cd/m²
relación de aspecto:	16:9
Relación de contraste (dinámica):	1000000:1
Cámara integrada:	Nee
Profundidad (sin base):	53.9 mm
Altura (sin base):	342.1 mm
Ancho (sin base):	569 mm
Peso (sin base):	2800 g
Clase de eficiencia energética (SDR):	G
Consumo de energía (DEG) por 1000 horas:	23 kWu
Ancho del dispositivo (con soporte):	569 mm
Dispositivo de profundidad (con soporte):	197 mm
Altura del dispositivo (con soporte):	417.2 mm
Peso (con soporte):	3150 g
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
Modo de juego:	Ja
Tipo de panel:	TN
Concentrador USB incorporado:	Nee
Soporte incluido:	Ja
Consumo de energía (promedio):	23 W
voltaje-de-entrada-de-CA:	100 - 240 V
Consumo de energía (típico):	23 W
Temperatura de funcionamiento (TT):	10 - 40 °C
Humedad relativa de funcionamiento (VV):	10 - 80 procent
Rango de ángulo de inclinación:	-1 - 20 °
Escala de eficiencia energética:	A tot G
Código del Sistema Armonizado (SA):	85285210
ajustes de inclinación:	Ja