Mill PH600DN S Manual de Usario

Mill Calentador PH600DN S

Lee a continuación 📖 el manual en español para Mill PH600DN S (15 páginas) en la categoría Calentador. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/15
ASSEMBLY AND INSTRUCTION MANUAL (EN)
Please read the instrucons carefully before use. Take good care of this manual for later use.
This assembly and instrucon manual applies to the following panel heaters:
IB300, IB600DN, IB900DN, IB1200DN, IB800L DN, IB1000L DN
IB600DN G, IB1200DN G, IB800L DN G
MB300, MB600DN, MB900DN, MB1200DN, MB800L DN, MB1000L DN
PH600DN, PH1000DN, PH600L DN, PH800L DN
PH600DN S, PH1000DN S, PH600L DN S, PH800L DN S
PH600DN G, PH1000DN G, PH600L DN G, PH800L DN G
Series: Steel & Glass
Contents
Important safety informaon .................................................................................................... 3
Descripon of the heater ........................................................................................................... 6
Assembly .................................................................................................................................... 7
Electronic thermostat — Instrucons….……………...................................………………………………………………8
Day/night thermostat – Instrucons ....................................................................................... 10
Maintenance ............................................................................................................................ 15
Warranty .................................................................................................................................. 15
Waste disposal ......................................................................................................................... 15
EN 2 millheat.com
Important safety informaon
You must obey common safety guidelines when using electrical products, especially in the presence of children.
WARNING! To avoid electric shock or damage due to the heat, always make sure the plug is pulled out before the heater is moved or
cleaned.
Read the instrucons carefully.
The product is intended for home use only.
Make sure the heater is connected to the house's regular mains (230 V), as it indicated on the heater.
New heaters will produce a specic odor when used the rst me. This will stop aer a short me and is completely
harmless.
Check for any pieces of packing foam or cardboard that may have fallen into the heang elements of the heater. These
pieces must be removed in order to avoid unpleasant odors.
Prevent the heater from overheang – do not cover.
Always turn o the heater and unplug it when not used for a long me.
Pay special aenon if the heater is used in rooms where children, the handicapped or elderly reside.
The heater should not be set up directly beneath an electrical socket outlet.
The cord must not be laid under any kind of carpet. Make sure the cord is laid in such a way that nobody can trip on it.
The heater must not be used if either the cord or plug is damaged. The heater must not be used if it has been dropped on
the oor or is damaged in any other way causing it to malfuncon.
The cord must be repaired by the manufacturer or by an expert if it has been damaged, to avoid dangerous situaons.
Avoid using extension cords, which may overheat and could possibly start a re.
Never cover the air vents on the heater. Avoid potenal re hazards by making sure the air intakes are not blocked or
covered. The heater should be used in rooms with normal at oors.
The heater should not be installed in close proximity to ammable materials of any kind because there can always be a risk
of re.
The heater must never be used in rooms where gasoline, paint or other ammable liquids are stored, such as in a garage.
The heater is approved for use in zone 2 in bathrooms.
Never touch an electric heater with wet hands. The heater should be installed so a person showering or taking a bath
cannot come into direct contact with it.
The heater becomes hot when it is on. Therefore, be careful and avoid burning or scorching your skin.
The heater must be switched o, the plug removed and the heater must cool down before it is moved.
Avoid overloading the mains (the circuit) where the heater is connected. The heater may overload the electrical circuit if
other electrical devices are plugged into the same socket outlet.
EN 3 millheat.com

Especificaciones del producto

Marca: Mill
Categoría: Calentador
Modelo: PH600DN S

¿Necesitas ayuda?

Si necesitas ayuda con Mill PH600DN S haz una pregunta a continuación y otros usuarios te responderán


Calentador Mill Manuales

Mill

Mill SG2000MEC Manual de Usario

1 Octubre 2024
Mill

Mill CB2000 GD Manual de Usario

29 Septiembre 2024
Mill

Mill SG2000LED Manual de Usario

22 Septiembre 2024
Mill

Mill CB2000 BT-ULG Manual de Usario

16 Septiembre 2024
Mill

Mill SG2000GLASS Manual de Usario

13 Septiembre 2024
Mill

Mill IB800L DN Manual de Usario

12 Septiembre 2024
Mill

Mill AB-H1000DN Manual de Usario

9 Agosto 2024
Mill

Mill OIL2000WIFI3 Manual de Usario

1 Agosto 2024
Mill

Mill PH600DN S Manual de Usario

31 Julio 2024
Mill

Mill SG1200WIFI Manual de Usario

28 Julio 2024

Calentador Manuales

Últimos Calentador Manuales

Vonroc

Vonroc PH503AC Manual de Usario

27 Octubre 2024
JANDY

JANDY VersaFlo Manual de Usario

27 Octubre 2024
Master

Master 215TMHD-KFA Manual de Usario

25 Octubre 2024
Yamazen

Yamazen DBC-VK123 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen DCT-B08 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen DOL-J122 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen DSF-S122 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen DBC-SK123 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen DBC-W121 Manual de Usario

23 Octubre 2024
Yamazen

Yamazen DMF-D021 Manual de Usario

23 Octubre 2024