Milwaukee 0884-20 Manual de Usario

Lee a continuación 📖 el manual en español para Milwaukee 0884-20 (12 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
Cat. No. / No de cat.
0884-20
M18 CORDLESS COMPACT BLOWER
SOUFFLANTE COMPACTE SANS FIL M18
SOPLADOR INALÁMBRICO COMPACTO M18
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Blowers have motors and other parts that can
produce sparks during normal use. Do not use
within 30 feet of areas where explosive materials
may be present (such as gasoline pumps and places
where liquids like paint thinners, cleaners, solvents,
etc. are stored).
Do not use in the presence of explosive dust,
liquids or vapors.
Do not use where oxygen or anesthetics are used.
Do not allow to be used as a toy. Close attention
is necessary when used by or near children.
Use extra care when using on stairs.
ELECTRICAL SAFETY
Do not handle charger, battery pack or blower
with wet hands.
PERSONAL SAFETY
STAY ALERT. Watch what you are doing and use
common sense. Do not use blower when you are
tired, distracted or under the inuence of drugs,
alcohol or medication causing diminished control.
The operation of a blower can result in foreign
objects being blown into eyes, which can result in
eye damage. User and bystanders must wear safety
goggles or glasses with side shields when blower is
in operation.
Wear a face or dust mask when working in dust
situations. Dust particles can harm your lungs.
Avoid accidental starting. Ensure the switch is
in the o󰀨-position before inserting battery pack.
Inserting battery pack in blower that has the switch
on invites accidents.
Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
blower in unexpected situations.
Keep hair, loose clothing, ngers, and all parts
of body away from openings and moving parts.
USE AND CARE
Use only as described in this manual. Use only
manufacturer’s recommended attachments.
Do not use to blow ammable or combustible
liquids such as gasoline or use in areas where they
may be present.
Do not blow anything that is burning or smoking
such as cigarettes, matches, or hot ashes.
•To reduce the risk of health hazards from vapors
or dust, do not blow toxic, carcinogenic or other
hazardous materials such as asbestos, arsenic,
barium, beryllium, lead, pesticides or other health
endangering materials.
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to lter out microscopic particles.
Do not leave blower unattended when battery
pack is installed. Remove battery pack when not
in use and before servicing.
Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint,
hair, and anything else that may reduce air ow.
Maintain blower. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may a󰀨ect the blower's
operation. If damaged, have the blower repaired
before use. Many accidents are caused by poorly
maintained tools.
Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
Use blower only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
Turn o󰀨 all controls before removing battery pack.
To reduce the risk of electric shock, do not use
on wet surfaces. Do not expose to rain. Store
indoors. Do not charge outdoors.
BATTERY PACK USE AND CARE
Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
Do not use damaged battery pack or blower.
If battery pack or blower are not working as they
should, have been dropped, damaged, left outdoors,
or dropped into water, return them to a service center.
IMPORTANT
SAFETY
INSTRUCTIONS
WARNING
WHEN USING
AN ELECTRI-
CAL BLOWER, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED,
INCLUDI NG THE FOLLOW I NG:
READ ALL INSTRUCTIONS BEFORE
USING BLOWER. FOR HOUSEHOLD
OR COMMERCIAL USE. BEFORE
USING THE BLOWER, READ THIS
OPERATOR’S MANUAL, YOUR BAT-
TERY PACK AND CHARGER OP-
ERATORS MANUALS, AND ALL
LABELS ON THE BLOWER, BAT-
TERY PACK, AND CHARGER. TO
REDUCE THE RISK OF FIRE, ELEC-
TRIC SHOCK, OR INJURY:
3
Do not burn or incinerate battery packs. Battery
packs may explode, causing personal injury or dam-
age. Toxic fumes and materials are created when
battery packs are burned.
SERVICE
Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY RULES FOR
COMPACT BLOWER
Before using the blower, read this operators
manual, your battery pack and charger opera-
tors manuals, and all labels on the blower, bat-
tery pack, and charger.
Wear ear protectors. Exposure to noise can cause
hearing loss.
WARNING
To reduce the risk of injury in ap-
plications that produce a consid-
erable amount of dust, use an OSHA compliant
dust extraction solution in accordance with the
solution’s operating instructions.
Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
READ AND
SAVE ALL
INSTRUCTIONS
FOR FUTURE USE
FUNCTIONAL DESCRIPTION
1. Trigger
2. Lock-on switch
3. Air ow control
4. Handle
5. Intake
6. Nozzle
7. Extension
8. Inator/Deator
attachment 5
1
3
2
7
6
4
8
SPECIFICATIONS
Cat. No. 0884-20 .....................................................
Volts.............................................................. 18 DC
Battery Type M18™ .................................................
Charger Type................................................M18™
Air Speed 160 MPH ..................................................
Fan Speed 18,000 RPM ...........................................
Recommended Ambient
Operating Temperature 0°F to 125°F ......................
SYMBOLOGY
Volts
Direct Current
Read operator's manual
Wear eye protection
CUS
UL Listing for Canada and U.S.
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
Always remove battery pack before
changing or removing accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Only use accessories specically
recommended for this tool. Others
may be hazardous.
Installing/Removing the Accessories
Blower:
To install the nozzle, extension, or inator adaptor,
line up the lugs of the accessory with the slots on the
blower. Push the accessory onto the blower. Twist
the accessory clockwise to lock into place.
To remove the accessory, twist counter-clockwise
and pull away from the blower.
Deator:
To install the adaptor onto the intake, line up the de-
tents on the adaptor with the tabs on the top and bot-
tom of the intake. Slide the adaptor onto the intake.
To remove the adaptor from the intake, pull the
adaptor away from the tool.

Especificaciones del producto

Marca: Milwaukee
Categoría: No categorizado
Modelo: 0884-20

¿Necesitas ayuda?

Si necesitas ayuda con Milwaukee 0884-20 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Milwaukee Manuales

No categorizado Manuales

Últimos No categorizado Manuales