Milwaukee 2270-20 Manual de Usario

Milwaukee No categorizado 2270-20

Lee a continuación 📖 el manual en español para Milwaukee 2270-20 (9 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/9

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

Contact Temp Meter

Dispositif de Mesure de la Température de Contact

Termómetro por Contacto

Cat. No.

No de Cat.

2270-20

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S

MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN

COMPRENDRE LE MANUEL DE L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL

MANUAL DEL OPERADOR.

2 3

FUNCTIONAL DESCRIPTION

1. Display

2. Power ON/OFF

3. °C or °F selector

4. Hold button

5. Mode selector

6. START STOP button

7. MIN MAX AVG button

8. T1 and T2 inputs

9. Battery life indicator

10. Primary measurement

11. Elapsed time total

12. Time MIN MAX

13. Hold indicator

14. Secondary measurement

15. °C or °F indicator

16. Delta T1-T2 indicator

Speciﬁ cations

Contact temp range: -200°C to 1372°C (-328°F to 2501°F)

Accuracy

For ambient temperatures 18°C to 28°C (64°F to 82°F)

Measurements from -100°C to 1372°C (-148°F to 2501°F)

± (0.1% of reading + 0.7°C)/(0.1% of reading +1.3°F)

Measurements from -200°C to -100°C (-328°F to -148°F)

± (0.4% of reading +0.7°C)/(0.4% of reading +1.3°F)

Temperature Coefﬁ cient

Measurements from -100°C to 1372°C (-148°F to 2501°F)

(0.01% of reading + 0.05°C) per degree C outside 18°C to 28°C ambient

(0.0056% of reading +0.05°F) per degree F outside of 64°F to 82°F ambient

Measurements from -200°C to -100°C (-328°F to -148°F)

(0.04% of reading + 0.05°C) per degree C outside 18°C to 28°C ambient

(0.022% of reading +0.05°F) per degree F outside of 64°F to 82°F ambient

Contact temp display resolution: 0.1°C/°F

K-Type Probe temp range: -60°C to 200°C (-76°F to 392°F)

K-Type Probe temp input accuracy: ±1.1°C or ±0.4% of reading, whichever is greater

Drop: 1 meter

Operating temperature: -10°C to 50°C (14°F to 122°F)

Storage temperature: -40°C to 60°C (-40°F to 140°F)

Relative humidity: 10 to 90% RH non-condensing at <30°C (<86°F) ambient

Battery: 3 AA batteries, LR6, 4.5V DC

Battery life: Greater than 80 hrs with all functions

Safety Compliances .... EN61326-1,2; IEC61000-3-2,3; IEC61000-4-2,3,4,5,6; CISPR11; FCC Part 15

Certiﬁ cations .... CE

IMPORTANT SAFETY INSTRUCTIONS

PERSONAL SAFETY

WORK AREA SAFETY

BATTERY USE AND CARE

SERVICE

WARNING READ ALL SAFETY WARNINGS AND INSTRUCTIONS. Failure to follow

the warnings and instructions may result in electric shock, ﬁ re and/or serious injury.

Save these instructions - This operator’s manual contains important safety and operating

instructions for the MILWAUKEE Contact Temp Meter. Before using, read this operator’s

manual and all labels on the meter.

• Keep children and bystanders away while

operating meter. Store idle Contact Temp

Meters out of the reach of children and do not

allow persons unfamiliar with the tool or these

instructions to operate them.

• Avoid dangerous environments. Do not use in

rain or snow. Do not immerse meter in water or

allow water to ﬂ ow into the meter. Do not use in

the presence of explosive atmospheres (gaseous

fumes, dust or ﬂ ammable materials) because

sparks may be generated when inserting or remov-

ing batteries, possibly causing ﬁ re.

• Stay alert, watch what you are doing and use

common sense when operating meter. Do not

use while you are tired or under the inﬂ uence

of drugs, alcohol or medication. A moment of

inattention may result in serious personal injury.

• Do not overreach. Keep proper footing and

balance at all times. This enables better control

in unexpected situations.

• Never connect the probe to an energized circuit.

• This tool is designed to be powered by

3-AA batteries properly inserted into the

MILWAUKEE meter. Do not attempt to use with

any other voltage or power supply.

• Do not leave batteries within the reach of children.

• Do not mix new and used batteries. Do not mix

brands (or types within brands) of batteries.

• Do not mix rechargeable and non-rechargeable

batteries.

• Install batteries according to polarity (+ / –)

diagrams.

• Properly dispose of used batteries immedi-

ately.

• Do not incinerate or dismantle batteries.

• Under abusive conditions, liquid may be eject-

ed from the battery, avoid contact. If contact

accidentally occurs, ﬂ ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Have your serviced by a qualimeter ﬁ ed repair

person using only identical replacement parts.

This will ensure that the safety of the tool is main-

tained.

• Do not disassemble. Incorrect reassembly may

result in the risk of electric shock or ﬁ re. If it is dam-

aged, take it to a MILWAUKEE service facility.

• Store in a cool, dry place. Do not store where

temperatures may exceed 140°F (60°C) such as

in direct sunlight, a vehicle or metal building during

the summer.

• Do not remove or deface labels. Maintain labels

and nameplates. These carry important information.

If unreadable or missing, contact a MILWAUKEE

service facility for a free replacement.

SYMBOLOGY

Read Operator’s Manual

Earth

Danger, Warning, or Caution -

Consult the operators manual for

additional safety information.

Battery compartment

European Conformity Mark

Do not dispose of this product as

unsorted municipal waste.

4 5

OPERATION

Making a Measurement

Insert the probe into the input. Two probes can be

used simultaneously.

Press and hold the button to turn the meter on.

The display will continue to update the contact

temperature while the temperature probe reaches

thermal equilibrium with the object being measured.

The display will switch to low backlight mode

5 minutes after the last button is pressed. The

meter will automatically power off after an additional

25 minutes if no buttons are pressed.

If the low battery life indicator appears , the

meter will automatically power off 5 minutes after

the last button is pressed (replace the batteries as

soon as possible).

Press the button or button to start the

timer and begin tracking the maximum, minimum

and average temperatures over time.

When the timer is activated the auto power off time

is extended to 30 hours.

Press the button to toggle through the

minimum, maximum, and average readings. The

measurement time readings also toggle through

the minimum, maximum, and average.

Press the button to turn off the timer and

stop tracking minimum, maximum and average

temperatures.

Press the button to toggle between Celsius

(°C) and Fahrenheit (°F).

Press the button to hold or release the dis-

played readings.

Press the button to change what is displayed

in the primary and secondary measurements.

Press and hold the button to turn the meter off.

WARNING Never connect the probe

to an energized circuit.

MAINTENANCE

WARNING To reduce the risk of per-

sonal injury and damage, never immerse your

tool in liquid or allow a liquid to ﬂ ow inside it.

WARNING To reduce the risk of injury,

always remove the batteries from the tool

before performing any maintenance. Never

disassemble the tool. Contact a MILWAUKEE

service facility for ALL repairs.

Cleaning

Clean dust and debris from tool. Keep tool clean, dry

and free of oil or grease. Use only mild soap and a

damp cloth to clean the tool since certain cleaning

agents and solvents are harmful to plastics and other

insulated parts. Some of these include gasoline,

turpentine, lacquer thinner, paint thinner, chlorinated

cleaning solvents, ammonia and household deter-

gents containing ammonia. Never use ﬂ ammable or

combustible solvents around tools.

Repairs

For repairs, return the tool to the nearest service

center listed on the back cover of this operator's

manual.

Maintaining Tool

Keep your tool in good repair by adopting a regular

maintenance program. After six months to one year,

depending on use, return the tool to a MILWAUKEE

service facility for repairs.

If the tool does not start or operate at full power

with new batteries, clean the contacts on the battery

door. If the tool still does not work properly, return

the tool to a service facility for repairs.MILWAUKEE

ACCESSORIES

For a complete listing of accessories refer to your

MILWAUKEE Electric Tool catalog or go online

to www.milwaukeetool.com. To obtain a catalog,

contact your local distributor or service center.

WARNING Always remove batteries

before changing or removing accessories. Only

use accessories speciﬁ cally recommended for

this tool. Others may be hazardous.

ASSEMBLY

WARNING To avoid an electrical

hazard, turn off the tool and disconnect the

thermocouples before replacing batteries.

Loading/Changing the Batteries

Replace batteries when the Low Battery indicator

is displayed.

1. Turn meter OFF and disconnect the probes.

2. Unscrew and remove battery door.

3. Insert three (3) AA batteries, according to the

polarity marked in the battery compartment

4. Close the battery door and tighten screws

securely.

Especificaciones del producto

Marca:	Milwaukee
Categoría:	No categorizado
Modelo:	2270-20
Colocación del dispositivo:	Vrijstaand
Color del producto:	Wit
Pantalla incorporada:	Ja
Ancho:	598 mm
Profundidad:	662 mm
Altura:	842 mm
tipo de cargador:	Voorbelading
Sistema de secado:	Warmtepomp
Temporizador de inicio retrasado:	Ja
Retraso del inicio:	24 uur
Duración del ciclo:	157 min
Nivel de ruido:	64 dB
Función antiarrugas:	Ja
Clase-de-eficiencia-energética:	A++
Consumo-anual-de-energía:	259 kWu
Ciclo antiarrugas:	120 min
Capacidad nominal:	9 kg
Tipo-de-visualización:	LED
Programas de secado:	Wool, Mix, Sport, Cotton, Synthetics