Motorola PIP1610 Manual de Usario

Lee a continuación 📖 el manual en español para Motorola PIP1610 (52 páginas) en la categoría monitor de bebé. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/52
Models:
PIP1610 HD CONNECT
PIP1610-2 HD CONNECT
PIP1610-3 HD CONNECT
PIP1610-4 HD CONNECT
Quick start guide / Schnellstartanleitung / Guide de démarrage rapide
/ Snelstartgids / Guía de inicio rápido / Guida rapida / Guia de início
rápido / Skrócona instrukcja obsługi / Rychlý návod / Stručná príručka /
Snabbstartsguide / Hurtigstart-guide
2
1. At a glance
Baby (camera) unit
Parent unit
1
2
3
5
4
6
7
1
2
5
6
7
8
4
3
9
10
1. Screen display
2. Dual sound level indications
(front and top view)
3. Power button
Press and hold to turn on or o. Press
to turn the screen on or o.
4. Menu button
Press to open the menu.
5. OK / Zoom button
Press to confirm a selection/zoom in
or out.
6. Navigation button
Pan or tilt the camera to dierent
directions/adjust menu settings/
press left or right to select the
parent unit's volume level.
7. Volume / Back button
8. Talk back button
Press and hold to talk to the baby.
9. Antenna
10. Speaker
1. Camera
2. Desk stand
3. Speaker
4. Antenna
5. Power jack
6. Power / Linking LED indicator
Lights up in blue when the parent unit is
powered on and linked to the baby (camera)
unit.
7. Pair button
Press and hold to pair with the parent unit.
EN
3
2. Connect and charge
Baby (camera) unit
1. Plug the DC plug of the power adapter into
the power socket on the rear of the baby
(camera) unit and plug the other end of the
AC adapter into the wall socket.
2. The baby unit turns on and the power
indicator lights up in blue and blinks in red
after 30 seconds if the parent unit has not
been powered up.
WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the
reach of children (more than 1 meter or 3 feet away). Do not remove the tags from
the AC Adapters. Only use the AC Adapters provided.
Parent unit
A rechargeable battery is already pre-installed inside the parent unit. When fully
charged, you can move the parent unit without losing the link and picture from the
baby (camera) unit. When charging the battery for the first time, charge for at least
16 hours continuously.
1. Plug the DC plug of the power adapter into
the power socket on the side of the parent
unit and plug the other end of the AC adapter
into the wall socket.
2. Switch on the AC power.
3. Press and hold the power button on the top of
the parent unit to turn it on.
4. When the parent unit is fully charged, will
appear steadily on the screen display.
Note
Use only the supplied power adapter (DC5V / 1500 mA).
Pair the baby (camera) unit to the parent unit
We have paired the baby unit to the parent unit in the pack. In case you want to pair
an extra camera, press and hold on the rear of the baby (camera) unit until the
voice prompt is heard. 'Ready for pairing'
3. Wall mount the baby (camera) unit
1. Mark the positions of 2 screw holes on the wall. Drill a screw hole at each marking.
2. Install the supplied wall anchors into 2 screw holes on the wall.
3. Insert the supplied wall mounting screws into the wall anchors.
4. Remove the desk stand by loosening the screw on the underside of the desk
stand.
5. Fix and fasten this screw on the baby (camera) unit and the wall mount bracket.
6. Hang the wall mount bracket on the wall mounting screws on the wall.
Press and hold

Especificaciones del producto

Marca: Motorola
Categoría: monitor de bebé
Modelo: PIP1610

¿Necesitas ayuda?

Si necesitas ayuda con Motorola PIP1610 haz una pregunta a continuación y otros usuarios te responderán




monitor de bebé Motorola Manuales

monitor de bebé Manuales

Últimos monitor de bebé Manuales