Motu 8A Manual de Usario

Motu sistema de alta fidelidad 8A

Lee a continuación 📖 el manual en español para Motu 8A (110 páginas) en la categoría sistema de alta fidelidad. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/110

™

User Guide

1280 Massachusetts Avenue

Cambridge, MA 02138

Business voice: (617) 576-2760

Business fax: (617) 576-3609

Web site: www.motu.com

Tech support: www.motu.com/support

Title Page

SAFETY PRECAUTIONS AND ELECTRICAL REQUIREMENTS FOR THE 8A (“PRODUCT”)

CAUTION! READ THIS SAFETY GUIDE BEFORE YOU BEGIN INSTALLATION OR OPERATION. FAILURE TO COMPLY WITH SAFETY

INSTRUCTIONS COULD RESULT IN BODILY INJURY OR EQUIPMENT DAMAGE.

HAZARDOUS VOLAGES: CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN. TURN OFF UNIT BEFORE SERVICING.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFEGUARDS

1. Read these instructions. All the safety and operating instructions should be read before operating the product.

2. Keep these instructions. These safety instructions and the product owner’s manual should be retained for future reference.

3. Heed all warnings. All warnings on the product and in the owner’s manual should be adhered to.

4. Follow all Instructions. All operating and use instructions should be followed.

5. Do not use the product near water.

6. Cleaning - Unplug the product from the computer and clean only with a dry cloth. Do not use liquid or aerosol cleaners.

7. Ventilation - Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Heat - Do not install the product near any heat sources such as radiators, heat registers, stoves, or another apparatus (including an ampliﬁer)

that produces heat.

9. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of ﬁre or electrical shock.

10.Power supply cord - Protect the product power supply cord from being walked on or pinched by items placed upon or against them.

11.Power switch - Install the product so that the power switch can be accessed and operated at all times.

12.Disconnect - The main power supply plug is considered to be the disconnect device for the product and shall remain readily operable.

13.Accessories - Only use attachments/accessories speciﬁed by the manufacturer.

14.Surge protection - Unplug the product during lightning storms or when unused for long periods of time.

15.Servicing - Refer all servicing to qualiﬁed service personnel. Servicing is required when the product has been damaged in any way, such as

when a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed

to rain or moisture, does not operate normally, or has been dropped.

16.Power Sources - Refer to the manufacturer’s operating instructions for power requirements.

17.Installation - Do not install the product in an unventilated rack, or directly above heat-producing equipment such as power ampliﬁers. Observe

the maximum ambient operating temperature listed below.

18.Power ampliﬁers- Never attach audio power ampliﬁer outputs directly to any of the unit’s connectors.

19.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts speciﬁed by the

manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in ﬁre, electric shock or other

hazards.

20.Safety Check - Upon completion of any service or repairs to this MOTU product, ask the service technician to perform safety checks to

determine that the product is in safe operating conditions.

ENVIRONMENT, HEAT AND VENTILATION

Operating Temperature: 10°C to 40°C (50°F to 104°). The product should be situated away from heat sources or other equipment that produces

heat. When installing the product in a rack or any other location, be sure there is adequate space around the product to ensure proper ventilation.

Improper ventilation will cause overheating and can damage the unit.

TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE

Do not handle the power supply with wet hands. Do not pull on the power supply cord when disconnecting it from an AC wall outlet. Grasp it by

the plug. Do not expose this apparatus to rain or moisture. Do not place objects containing liquids on it.

DC INPUT

10 - 24V DC • 1.0A max

III

Contents

Part 1: Getting Started

7Quick Start Guide

98A Front Panel

10 8A Rear Panel

11 MOTU Pro Audio Control Web App

23 About the 8A

27 Packing List and System Requirements

29 Software Installation

33 Hardware Installation

Part 2: Using the 8A

49 Presets

53 The Front Panel LCD

55 Working with Host Audio Software

63 Mixer Effects

71 MOTU Audio Tools

87 Networking

Part 3: Appendices

95 Troubleshooting

97 Audio Specifications

99 Mixer Schematics

103 Updating Firmware

105 OSC Support

107 Index

Especificaciones del producto

Marca:	Motu
Categoría:	sistema de alta fidelidad
Modelo:	8A
Color del producto:	Wit
Peso.:	4700 g
Longitud del cable:	7.5 m
Nivel de ruido:	- dB
Consumo-anual-de-energía:	- kWu
Filtración de aire de aspiradora:	HEPA
Método de separación de la suciedad:	Filtrerend
tipo de limpieza:	Droog
Capacidad de polvo:	2.4 l
Potencia máxima de entrada:	1600 W
Interruptor encendido / apagado:	Ja
Tipo de contenedor de aspiradora:	Zakloos
poder de succión:	210 AW
Material de tubería/manguera:	Metaal
Limpia superficies:	Carpet, Hard floor
herramienta para rincones:	Ja
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 Hz