Moxa AWK-3121-SSC-EU Manual de Usario
Moxa
repetidor wifi
AWK-3121-SSC-EU
Lee a continuación 📖 el manual en español para Moxa AWK-3121-SSC-EU (15 páginas) en la categoría repetidor wifi. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/15
12 . A20 Moxa Inc ll rights reserved.
Reproduction without permission is prohibited.
P/N: 1802031210013
AWK- 3121
Quick Installation Guide
Moxa AirWorks
F ifth Edition, March 2012
- - 2
Overview
Moxa’s AWK-3121 Access Point/Bridge/AP Client is ideal for applications
that are hard to wire, too expensive to wire, or use mobile equipment that
connects over a TCP/IP network. The AW K-3121 is rated to operate at
temperatures ranging from - 25 to 60°C for standard models and -40 to
75°C for extended temperature models, and is rugged enough for any
harsh industrial environment. Installation is easy, with either DIN-Rail
mounting or distribution boxes. The DIN-Rail mounting ability, wide
operating temperature range, and IP30 housing with LED indicators make
the AWK-3121 a convenient yet reliable solution for any industrial
wireless application.
Package Checklist
M -oxa’s AWK 3121 is shipped with the following items. If any of these
items is missing or damaged, please contact your customer service
representative for assistance.
• 1 AWK- 3121
• 2 Dual- A s - band Omnidirectional ntenna (2dBi, RP SMA, 2.4&5GHz)
• 1 Q I G uick nstallation uide
• 1 S oftware CD
• 1 Moxa P W B roduct arranty ooklet
• 1 C H S able older with a crew
• 2 Protective C s ap
Installation and Configuration
Before installing the AWK-3121, make sure that all items in the Package
Checklist are in the box. In addition, you will need access to a notebook
computer or PC equipped with an Ethernet port. The AWK-3121 has a
default IP address that you must use when connecting to the device for
the first time.
Step 1: Select the power source
The AWK-3121 can be powered by a DC power input or PoE (Power over
Ethernet). The AWK- 3121 will use whichever power source you choose.
Step 2: Connect the AWK-3121 to a notebook or PC
Since the AWK- -3121 supports MDI/MDI X auto-sensing, you can use
either a straight-through cable or crossover cable to connect the
AWK- -3121 to a computer. If the LED indicator on the AWK 3121’s LAN
port lights up, it means the connection is established.
Step 3: Set up the computer’s IP address
Set an IP address on the same subnet as the AWK-3121. Since the
AWK-3121’s default IP address is 192.168.127.253, and the subnet mask
is 255.255.255.0, you should set the IP address of the computer to
192.168.127.xxx and subnet mask to 255.255.255.0.
- - 3
Step 4: Use the web-based manager to configure
AWK 3121-
Open your computer’s web browser and then type
http://192.168.127.253 in the address field to access the homepage
of the web-based management. Before the homepage opens, you will
need to enter the user name -and password. For first time configuration,
enter the default user name and password and then click on the Login
button:
User name: admin
Password: root
ATTENTION
For security reasons, we strongly recommend changing the
password. To do so,
select Maintenance
Password
, and then
follow the on- screen instructions.
Step 5: Select the operation mode for the AWK-3121
By default, the AWK-3121’s operation mode is set to AP. You can change
the setting in Wireless Settings Basic Wireless Settings if you
would like to use the . Client mode
NOTE
To make the change effective, you must click Save Configuration
to save the change or Restart ( Save and Restart button to apply
all changes.
Step 6: Test communications
We will describe two test methods. Use the first method if you are using
only one -AWK 3121, and use the second method if you are using two or
more - . AWK 3121s
Testing method for one AWK-3121
If you are only using one AWK-3121, you will need a second notebook
computer (B) equipped with a WLAN card. Configure the WLAN card to
connect to the AWK- ) 3121 (the default SSID is MOXA and change the IP
address of notebook B so that it is on the same subnet as the first
notebook - . (A), which is connected to the AWK 3121
After configuring the WLAN card, establish a wireless connection with the
AWK- 3121 and open a DOS window on notebook B. At the prompt, type
ping IP address of notebook A
and then press the Enter key. A “Reply from IP address …” response
means the communication was successful. A “Request timed out.”
response means the communication failed. In this case, recheck the
configuration to make sure the connections are correct.
Testing method for two or more AWK- 3121s
If you have two or more AWK-3121s, you will need a second notebook
computer (B) equipped with an Ethernet port. Use the default settings for
Especificaciones del producto
| Marca: | Moxa |
| Categoría: | repetidor wifi |
| Modelo: | AWK-3121-SSC-EU |
¿Necesitas ayuda?
Si necesitas ayuda con Moxa AWK-3121-SSC-EU haz una pregunta a continuación y otros usuarios te responderán
repetidor wifi Moxa Manuales
4 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
4 Septiembre 2024
repetidor wifi Manuales
- repetidor wifi Xiaomi
- repetidor wifi Medion
- repetidor wifi Allnet
- repetidor wifi Edimax
- repetidor wifi Strong
- repetidor wifi Hikvision
- repetidor wifi Silvercrest
- repetidor wifi Gembird
- repetidor wifi Asus
- repetidor wifi Renkforce
- repetidor wifi Sitecom
- repetidor wifi TP Link
- repetidor wifi Black Box
- repetidor wifi Vision
- repetidor wifi Axis
- repetidor wifi AVM
- repetidor wifi Totolink
- repetidor wifi Cisco
- repetidor wifi Engenius
- repetidor wifi Envivo
- repetidor wifi Digitus
- repetidor wifi Devolo
- repetidor wifi Linksys
- repetidor wifi Buffalo
- repetidor wifi Davis
- repetidor wifi Netgear
- repetidor wifi LevelOne
- repetidor wifi Mercusys
- repetidor wifi Planet
- repetidor wifi Western Digital
- repetidor wifi D-Link
- repetidor wifi Essentiel B
- repetidor wifi Fluke
- repetidor wifi Marmitek
- repetidor wifi Ubiquiti Networks
- repetidor wifi Mikrotik
- repetidor wifi Hawking Technologies
- repetidor wifi Crestron
- repetidor wifi Smart-AVI
- repetidor wifi StarTech.com
- repetidor wifi SIIG
- repetidor wifi IOGEAR
- repetidor wifi Extron
- repetidor wifi KanexPro
- repetidor wifi DTRONIC
- repetidor wifi Cudy
- repetidor wifi Lindy
- repetidor wifi HELGI
- repetidor wifi Multi-link
- repetidor wifi Atto
- repetidor wifi Amped Wireless
- repetidor wifi Barox
- repetidor wifi Heden
- repetidor wifi Ruckus Wireless
- repetidor wifi Axing
- repetidor wifi EXSYS
- repetidor wifi Gewiss
- repetidor wifi Seco-Larm
- repetidor wifi NetComm
- repetidor wifi Altronix
- repetidor wifi Juniper
- repetidor wifi ALC
- repetidor wifi Comtrend
- repetidor wifi Universal Remote Control
- repetidor wifi IDIS
- repetidor wifi CSL
Últimos repetidor wifi Manuales
14 Octubre 2024
10 Octubre 2024
10 Octubre 2024
3 Octubre 2024
3 Octubre 2024
30 Septiembre 2024
30 Septiembre 2024
29 Septiembre 2024
29 Septiembre 2024
28 Septiembre 2024