Moxa NPort Express DE-311 Manual de Usario

Moxa repetidor wifi NPort Express DE-311

Lee a continuación 📖 el manual en español para Moxa NPort Express DE-311 (6 páginas) en la categoría repetidor wifi. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
P/N: 1802003114403
*1802003114403*
NPort DE- 311 Series
Quick Installation Guide
Vers 20ion January 5.2, 21
Technical Support Contact Information
www.moxa.com/support
2 . A 20 1 Moxa Inc ll rights reserved.
- - 2
Overview
Welcome to Moxa’s - -NPort Express DE 311, a compact palm sized data
communication device that allows you to control RS-232/422/485 serial
devices over a TCP/IP based Ethernet . network
Package Checklist
Before installing the DE-311, verify that the package contains the
following items:
- u s d s NPort DE 311 niversal erial evice erver
a er Mini dapt
Quick installation guide (printed)
Warranty card
Optional Accessories
- -r , DK 35A (for 35 mm DIN ail includes 4 screws)
Please notify your sales representative if any of the above items is
missing or damaged.
Hardware Introduction
- - 3
Reset Button—Hold the reset button down to erase the password or load
the factory defaults, depending on how long the button is held down:
3 seconds to erase the password
The ready LED will flash every half-second when the password has
been erased. You may release the reset button at this time.
10 seconds to load factory defaults
The ready LED will flash five times every second when the factory
defaults have been loaded. You may release the reset button at this
time.
LED Indicators There are three LED indicators on the top panel:
LED Name
LED Color
PWR
R ed
O ff
Link
O range
G reen
O ff
Ready
G reen
O ff
Hardware Installation
Placement Options
You may place the unit on
a desktop or other
horizontal surface.
You
may also make use of the
DIN
-rail or wall mount
options, as illustrated
here.
Wall Mount
DIN- Rail
DIP Switch
The top panel contains the following table, which explains the DIP switch
settings for the serial port. The DIP switches are located at the rear panel.
SW1
Serial Connection
SW2
SW3
Interface Mode
ON
RS- 232 Console
OFF Data Comm
OFF
OFF
RS- 232
OFF
ON
RS- 422
ON
OFF
2- - wire RS 485 by RTS
ON
ON
2- - wire RS 485 by ADDC
SW1 is used to activate the serial console. When SW1 has been changed,
the unit will reboot to initialize the new setting. You will need to wait for
the green Ready LED to turn off and then on again, which indicates that
serial console mode has been activated or deactivated. SW2 and SW3 are
used to select the serial port interface. (Note that RTS stands for Ready
To Send and ADDC stands for Automatic Data Direction Control.)

Especificaciones del producto

Marca: Moxa
Categoría: repetidor wifi
Modelo: NPort Express DE-311

¿Necesitas ayuda?

Si necesitas ayuda con Moxa NPort Express DE-311 haz una pregunta a continuación y otros usuarios te responderán




repetidor wifi Moxa Manuales

repetidor wifi Manuales

Últimos repetidor wifi Manuales