Mtx Audio iWa225 Manual de Usario

Lee a continuación 📖 el manual en español para Mtx Audio iWa225 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Owner’s manual
iWa225
Smart in-wall Bluetooth® 2x25W amplifier
Designed by MTX in Phoenix, AZ - USA
mtxaudio.eu facebook.com/MTXEuropetwitter.com/MTXEurope
In the Box
Specifications
Connections
Thank You !
Thank you for purchasing the MTX iWa225 high-end, high-definition audio amplifier. The iWa225 is designed to deliver a deeper dimension
that brings your music to life. No other system provides the exacting measure of clarity in such a small unit. Whether you are listening from
your iPad, iPhone, iPod or computer, the iWa225 delivers outstanding sound quality. Congratulations for making a smart choice and enjoy
the ultimate audio experience with MTX.
1. RCA Inputs - These RCA inputs are used with your external
music source. MTX recommends only high quality RCA cables to
decrease the possibility of radiated noise entering the system.
2. Bluetooth antenna connector - Connect the provided an-
tenna. Note the BT input will not work properly without the
antenna. It also requires that the IR receiver and IR remote
control are in sight.
3. IR (Infra red receiver connector - Connect the provided IR
sensor. Note that without IR sensor, the remote control will not
be functional.
4. Speakers connectors - Connect your 4Ω or speakers to it.
Be carefull with the polarities. Reverse polarity strongly de-
grades the level of serious and sound quality.
5. Power supply connector - use the provided power cord
and connect it to a 110V or 220V wall plug. You don’t need to
change any setting.
1x iWa225 amp with its built in power supply
1x Bluetooth antenna
1x Power cable
1x IR (Infra red) receiver
1x Remote control
1x This owner’s manual
• Power : 2x25W RMS @4Ω 0,1%THD+N or 2x13W RMS @8Ω 0,1%THD+N
• Compatible load : 4Ω to 8Ω
• Inputs : Bluetooth and Aux (RCA)
• Remote : IR receiver with 100cm cable
• Power supply : 100~120V - 200~240V, 50 - 60Hz
• Dimensions : 8x20x8cm
Weight : 920g (amp only)
Remote control keys
Quick start
Bluetooth paring
Recycling
How to Stay Tuned :
Do not trash this product. You must deliver it to the applicable collection point for recycling. The iWa225 is made of highly recyclable com-
ponents and materials.
1. Power OFF : use to switch off the unit. Note that it doesn’t switch on the unit…
2. Aux input : push once to switch on the iWa225 and use the AUX input.
->The right red LED will switch on
3. Bluetooth input : Push once to switch on the iWa225 and to use the BT input.
->The left blue LED will switch on
4. Volume UP : use it to raise the volume level
5. Skip backward : push once to go back in track (only available in BT)
6. Skip forward : push once to go next (only available in BT)
7. Volume Down : use it to reduce the volume level
8. Play/Pause : push once to play or pause the track(only available in BT mode)
9. BT paring : Push once to pair a new device to with your iWa225.
Push once to release the BT connexion.
1. Screw the antenna
2. Connect the speakers. It is important to respect the speaker polarities to get a good sound and a good bass response. Note that the
minimum speaker load is
3. Connect the RCA inputs if available
4. Connect the IR sensor and make it visible for the IR remote control
5. Connect the power cable to a wall socket. Your iWa225 is ready
6. On the remote control, remove the battery protection to activate it
7. Press the Aux input or the BT input on the remote control. The amp is on.
8. If you use the Aux input, adjust the volume level.
9. If you use the Bluetooth input, go to the next paragraph.
1. First connexion : push the Bluetooth key (n°3) on the remote control. The unit is switching on and the blue LED is now on.
2. Push once on the “BT paring/release key (n°9) on the remote control. The blue LED is now flashing blue. The unit is ready to pair.
3. On your BT device (Cell phone, iPad, computer), go to the BT preferences and tap on “MTX iWa225” to pair the devices together.
4. When it is done, go to your music app and play a track.
Note 1 : After 1 minute without BT signal, the unit will switch to Aux automatically if it detects signal on Aux.
Note 2 : You have to be in BT input to release BT.
Note 3 : You can always release the MTX iWa225 and make it available for an other BT device by simply pushing the “BT paring” (n°9) key
on the remote control. You don’t need to disconnect the devices, just push once “BT paring” (n°9).
https://www.facebook.com/MTXEurope
https://twitter.com/MTXEurope
http://www.mtxaudio.eu

Especificaciones del producto

Marca: Mtx Audio
Categoría: No categorizado
Modelo: iWa225

¿Necesitas ayuda?

Si necesitas ayuda con Mtx Audio iWa225 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Mtx Audio Manuales

No categorizado Manuales

Últimos No categorizado Manuales