Netis PE6310 Manual de Usario

Netis No categorizado PE6310

Lee a continuación 📖 el manual en español para Netis PE6310 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

What it does:

The 8FE+2 Combo-Port Gigabit Ethernet SNMP PoE Switch PE6310 provides a great selection for expanding your

home or office network. It is fully complies with IEEE802.3/802.3u/802.3z Ethernet standards. It provides 8

10/100Mbps RJ45 Ports and 2 Combo 10/100/1000Mbps SFP Slots. All the 8 10/100Mbps RJ45 ports support

Power over Ethernet(PoE) function. It can automatically detect and supply power with the IEEE 802.3at/af

compliant Powered Devices (PDs), like PoE APs, IP Phones, IP cameras, etc. It also provides powerful

management functions, including 802.1p (QoS), DiffServ(QoS), IGMP Snooping, 802.1w (Rapid Spanning Tree),

Link Aggregation, 802.1q (VLANs), 802.1x and more. It's a perfect way to extend your network structure.

> 8* 10/100 Mbps Ethernet ports, 2*10/100/1000 Mbps Ethernet ports supporting both copper and SFP connections

> Complies with IEEE 802.3at/af standards

> Supports PoE power up to 30W for each PoE port, 140W for all PoE ports

> Supports PoE IEEE 802.3at/af compliant Powered Device (PD)

> Intelligent Power Management, Support configuration port power priority

> The warning lamp of MAX Power

> 5.6Gbps switching fabric capacity

> Broadcast storm control

> Support multiple VLANs

> Supports Spanning Tree Protocol

> Supports Link Aggregation( IEEE 802.3ad ) for 8 groups of link aggregators with up to 8 ports per-group

> Port isolation function to enhance port security

> Supports IGMP snooping v1 and v2 and v3

> Supports Multicast VLAN Registration

> Supports powerful security functions like ACL, dynamic ARP inspection and more

> Supports SNMP v1, v2c, and v3 switch management

> SupportsWEB/CLI managed modes

Easy Network, Trustable

8FE+2 Combo-Port

Gigabit Ethernet SNMP PoE Switch

PE6310

Features:

PE6310

8FE+2 Combo-Port Gigabit Ethernet SNMP PoE Switch

Specification:

8 * 10/100Mbps Fast Ethernet ports, with PoE function

2 * 10/100/1000Mbps TP and SFP shared combo interfaces,

SFP(Mini-GBIC) supports1000 Full mode

Hardware

PWR, SYS, LINK/ACT,LINK,PoE,MAX

100-240 V AC/50-60Hz

Interface

LED

Power Supply

140Watts (max. with PD connected)

PoE Power

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3x,

IEEE 802.3ad, IEEE802.3z, IEEE802.3at, IEEE802.3af, IEEE 802.1p, IEEE 802.1q,

IEEE 802.1d, IEEE 802.1w, IEEE 802.1s

Software

Standard

Switching Fabric Capacity

MAC Address Table

5.6 Gbps

8K, auto-learning & auto-aging

Link Aggregation

Packet Buffer Memory 4.1 Mbits

Transmission Method Store and Forward

10BASE-T: UTP Cat.3 or up

100 BASE-TX: UTP Cat.5 or up

1000Base-TX: UTP Cat.5 or up

Single-mode or Multi-mode fiber (with SFP connect) for fiber port

Cabling Type

Cisco ether-Channel (Static Trunk)IEEE 802.3ad LACP (Link Aggregation Control Protocol)

Up to8 Trunk groupsUp to 8 ports per trunk group

440x 200x 44 mm

Dimensions (L xW x H )

STP, IEEE 802.1D (Classic Spanning Tree Protocol)

RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)

MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)

Loopback detection

Spanning Tree Protocol (STP)

Multicast

MAC Address Table

IGMP Snooping V1/V2/V3 Multicast VLAN Registration (MVR)

8K, auto-learning & auto-aging

Speci fications are s u bject to cha n ge w it hout notice. Netis is a reg istered trad em ar k of Netis Syst em s C o., Ltd. Othe r brands a nd product na m es a re t rademar ks o r

registered t rademarks o f th eir respe ct iv e h olders. No p a rt o f th e sp ecificatio ns m ay be reproduced i n any form or b y an y m ea ns o r us e d to m ak e an y de r iv ative suc h