Nitecore P05 Manual de Usario
Lee a continuación 📖 el manual en español para Nitecore P05 (1 páginas) en la categoría Flash. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/1
®
User Manual
Features
• Compact and lightweight
• Designed for tactical and self-defense applications
• Utilises a CREE XM-L2 U2 LED
• Maximum output up to 460 lumens
• Powered by 1 CR123/RCR123 battery
• PDOT (Precision Digital Optic Technology) provides extreme reflector performance
• Tactical tail switch
• STROBE READY TM allows instant access to strobe (Patent No. 201320545349.4)
• Built-in power indicator located in tail cap reports battery level (Patent No. ZL201220057767.4)
• High efficiency constant current circuit provides consistent output
• Anti-rolling design
• Mineral optic lens with anti-reflective coating
• Aerospace grade aluminium alloy construction
• HAIII hard anodizing
• Waterproof in accordance with IPX8 (2 metres submersible)
• Impact resistant to 1.5 metre
Dimensions
Length: 3.97” (101mm)
Head Diameter: 1” (25.4mm)
Tail Diameter: 1” (25.4mm)
Weight: 2.13oz(60.5g)(without battery)
Battery Options
Brightness & Runtime
Thanks for purchasing NITECORE!
The All-Round Flashlight Expert
Accessories
Included: Holster, Lanyard, Clip, Spare O-ring
Optional: Remote switch RSW2, Tactical
lanyard NTL10/NTL20
Operation Instructions
Battery Installation
Insert a CR123 or RCR123 battery with the positive
polarity pointing towards the head as illustrated in
the diagram:
NOTE: Upon battery installation, the built-in power
indicator will blink to report remaining battery
power, for more information, please refer to the
“Power Tips” section.
Caution:
1. Do not install battery backward, it will render the
P05 inoperative.
2. AVOID direct eye exposure.
Brightness Adjustment
With the light turned on, press the “MODE” switch to cycle through High-Mid-Low output. The P05
comes with no memory effect for brightness, it will turn on in “High” by default.
STROBE READY
1. With the light turned off, hold down the “MODE” switch to turn on strobe instantly, release the
switch to turn off.
2. With the light turned on, hold down the “MODE” switch for 0.2 second to enter strobe, pressing
the “MODE” switch again enters brightness adjustment, to turn off, press the tail switch
Note: The P05 has memory effect under strobe mode, turning the P05 on after it was turned off
in strobe mode will resume the same mode.
Power Tips
Upon battery installation, the built-in power indicator will blink to report remaining battery power:
3 blinks, battery power over 50%
2 blinks, battery power below 50%
1 blink, battery power below 10%
Note: The power indication is set to be activated after 5 seconds of power cutoff. To inspect
battery power, please loosen the tail cap, wait 5 seconds and re-tighten it.
Changing Batteries
Batteries should be replaced when any of the following occurs: The power indicators blink rapidly,
output appears to be dim or the flashlight becomes unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of
silicon-based lubricant.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any problem
covered under warranty occurs, customers can contact their dealers or distributors in regards to
their warranty claims, as long as the product was purchased from an authorized dealer or
distributor. NITECORE’s Warranty is provided only for products purchased from an authorized
source. This applies to all NITECORE products.
Any DOA / defective product can be exchanged for a replacement through a local
distributor/dealer within the 15 days of purchase. After 15 days, all defective / malfunctioning
NITECORE® products can be repaired free of charge for a period of 60 months (5 years) from the
date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the cost of
labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified if the product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties, or damaged by batteries leakage. For the latest information on NITECORE®
products and services, please contact a local NITECORE® distributor or send an email to
service@nitecore.com.
※All images, text and statements specified herein this user manual are for reference purpose
only. Should any discrepancy occurs between this manual and information specified on
www.nitecore.com. Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the
content of this document at any time without prior notice.
NOTE
The stated data has been measured in
accordance with the international
flashlight testing standards ANSI/NEMA
FL1, using 1x CR123 battery (3V,1700mAh)
or 1 x RCR123 batteries (3.7V, 650mAh)
under laboratory conditions. The data may
vary in real-world use due to different
battery use or environmental conditions.
* Runtime for turbo mode is calculated
based on theoretical arithmetic.
TYPE
Nominal voltage
Compatible
Primary Lithium battery CR123 3V Y (Recommended)
Y (Recommended)
Rechargeable Li-ion battery RCR123 3.7V
P05
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
HIGH MID LOW LOW
LUMENS
170
LUMENS
420
LUMENS
60
*45min 4
h min15
2
h min15
LUMENS
170
LUMENS
460
LUMENS
60
*30min
1
h
1
h min45
150m
(Beam Distance)
5,650cd
(Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m
(Impact Resistant)
Tactical Momentary Illumination
Hold the tail switch partway down to enter momentary illumination, release the switch to turn the
light off.
ON/OFF
Press the tail switch until a click is heard to turn on the P05, press the tail switch again to turn off.
20161019
Please find us on facebook:
NITECORE Flashlights
1×CR1231×RCR123
R
Especificaciones del producto
| Marca: | Nitecore |
| Categoría: | Flash |
| Modelo: | P05 |
¿Necesitas ayuda?
Si necesitas ayuda con Nitecore P05 haz una pregunta a continuación y otros usuarios te responderán
Flash Nitecore Manuales
19 Septiembre 2024
19 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
16 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
12 Septiembre 2024
7 Septiembre 2024
Flash Manuales
- Flash DeWalt
- Flash Garmin
- Flash Abus
- Flash Aluratek
- Flash Ansmann
- Flash Anker
- Flash Silverline
- Flash Brennenstuhl
- Flash Gorenje
- Flash Neff
- Flash Makita
- Flash Nedis
- Flash Black And Decker
- Flash Stanley
- Flash Ryobi
- Flash Streamlight
- Flash Spanninga
- Flash Milwaukee
- Flash Nordride
- Flash Hikoki
- Flash Carson
- Flash EMOS
- Flash Cateye
- Flash Sanyo
- Flash Einhell
- Flash Hama
- Flash Fenix
- Flash Varta
- Flash GoGEN
- Flash Maktec
- Flash Steren
- Flash Trelock
- Flash Livarno
- Flash Petzl
- Flash Black Diamond
- Flash Craftsman
- Flash Olympia
- Flash Maglite
- Flash Asaklitt
- Flash Kayoba
- Flash Goobay
- Flash Olight
- Flash Barska
- Flash TFA
- Flash Little Tikes
- Flash Topeak
- Flash LED Lenser
- Flash HQ
- Flash Princeton Tec
- Flash Parat
- Flash Rocktrail
- Flash Coleman
- Flash Alpha
- Flash VDO
- Flash Toolcraft
- Flash PCE
- Flash Energizer
- Flash Duronic
- Flash Dorr
- Flash Ledlenser
- Flash WAGAN
- Flash Silva Schneider
- Flash Schwaiger
- Flash SureFire
- Flash Tecxus
- Flash Goal Zero
- Flash Knog
- Flash 4K5
- Flash IVT
- Flash GP
- Flash AccuLux
- Flash Klein Tools
- Flash ArmyTek
- Flash Lupine
- Flash CEL-TEC
- Flash Nebo
- Flash Underwater Kinetics
- Flash MOON
- Flash NightStick
- Flash KSE-Lights
- Flash SuperNova
- Flash Alpen Optics
- Flash Arcas
- Flash Coast
- Flash Beghelli
- Flash FoxFury
- Flash Blackburn
Últimos Flash Manuales
17 Octubre 2024
15 Octubre 2024
11 Octubre 2024
7 Octubre 2024
7 Octubre 2024
4 Octubre 2024
2 Octubre 2024
2 Octubre 2024
1 Octubre 2024
1 Octubre 2024